Windows 가상 IoT

Windows 가상 IoT를 사용하려면:

  1. Make sure the computer runs an updated version of Windows (Windows 10 or Windows 11), whether it’s a laptop, desktop, or server.

  2. Install the Windows virtual IoT on the Windows computer.

  3. 장치 를 Windows 가상 IoT에 연결합니다.

  4. Windows 방화벽 환경설정.

  5. Windows 가상 IoT를 Odoo 데이터베이스에 연결합니다.

참고

  • MRP devices, including cameras and measurement tools, are not compatible with Windows virtual IoT.

  • It is also possible to create a Windows Virtual Machine on a macOS/Linux computer. However, this option is not supported by Odoo, and no troubleshooting assistance will be provided.

더 보기

문제 해결

중요

Never make the Windows virtual IoT accessible from the public Internet. IoT systems are designed to provide your database with access to devices on your local network. Exposing them to the public Internet would create a security risk.

설치

Windows 컴퓨터에 Windows 가상 IoT를 설치하려면:

  1. Access Odoo’s download page, scroll down to the Virtual IOT section, and click Download.

  2. Open the downloaded .exe file, allow the app to make changes to your device, select a language, and click OK.

  3. 다음 을 클릭한 다음 동의함 을 클릭하여 이용약관에 동의한 후 계속합니다.

  4. 컴퓨터에 필요한 공간이 있는지 확인하고 다음 을 클릭합니다.

  5. 대상 폴더 에 C:\odoo를 입력한 후 설치 를 클릭합니다.

    경고

    Do not install Odoo’s Windows virtual IoT in any Windows user directory, as this can cause issues with HTTPS certificate generation.

  6. Set up GPL Ghostscript: Click Next, agree to the terms and conditions, click Install, then Finish.

  7. Click Next and Finish to complete the setup. The IoT system’s homepage automatically opens in a web browser with the URL http://localhost:8069.

  8. Windows 가상 IoT 서비스를 재시작 합니다.

  9. 웹 브라우저에서 IoT 시스템 홈페이지 에 액세스할 수 있는지 확인하세요.

    • Windows 가상 IoT 컴퓨터에서 실행하며,

    • on another device on the same network as the IoT system by navigating to the URL http://xxx:8069 (where xxx is the IoT system’s IP address).

    • on another device on the same network as the IoT system by navigating to the URL https://xxx (where xxx is the IoT system’s IP address) to test for HTTPS connection.

      팁

      If you cannot access the IoT system’s homepage from another device, create a Windows Firewall rule to allow communication through port 8069.

장치 연결

대부분의 장치 는 Windows 플러그 앤 플레이(PnP) 기능을 통해 Windows Virtual IoT에 사용되는 Windows 컴퓨터에 자동으로 연결됩니다. 그러나 Windows 연결 시 장치가 자동으로 인식되지 못하는 경우에는 관리자가 적절한 드라이버를 수동으로 설치해야 할 수 있습니다.

팁

After connecting the devices to the computer, refresh the IoT system’s homepage to verify that the device is listed. If the device does not appear, reload the handlers from the IoT system’s homepage.

Windows 방화벽 환경설정

Firewalls help keep devices secure but can sometimes block legitimate connections. If the Windows virtual IoT isn’t accessible on the LAN, for example, from another device, it could be due to a firewall blocking the connection. To prevent this issue, configure exceptions for network discovery in the OS or firewall settings.

참고

If third-party firewall software is installed on the Windows computer, refer to the software’s documentation to configure firewall exceptions.

To create a rule on Windows Defender and allow communication through the required ports, follow these steps:

  1. Search the Windows start menu for firewall and select the Windows Defender Firewall with Advanced Security app.

  2. 창 왼쪽에 있는 인바운드 규칙 을 선택합니다.

  3. 창 오른쪽에 있는 작업 에서 새 규칙 을 클릭합니다.

  4. In the New Inbound Rule Wizard that opens, select the Port type of rule and click Next.

  5. On the Protocols and Ports page, make sure TCP and Specified local ports are selected, enter the following in the field: 8069, 80, 443, and click Next.

    참고

    Other ports may be required depending on your IoT devices. For example, add port 9050 for the Worldline payment terminal and port 9000 for the Ingenico payment terminal.

  6. 활동 페이지에서 연결 허용 을 선택한 후 다음 을 클릭합니다.

  7. On the Profile page, disable any connection type(s) that don’t apply to your Windows computer and click Next.

  8. On the Name page, provide a Name (e.g., Odoo) and, optionally, a brief Description, then click Finish.

더 보기

Windows 방화벽 규칙 문서

Windows 가상 IoT 홈페이지

Windows 가상 IoT 홈페이지에 액세스하려면, Windows 가상 IoT 컴퓨터에서 URL http://localhost:8069 로 이동하거나 IoT 시스템과 같은 네트워크에 있는 다른 컴퓨터에서 웹 브라우저를 열고 URL http://xxx:8069 로 이동합니다(여기서 xxx 는 IoT 시스템의 IP 주소입니다).

Once the Windows virtual IoT is connected to the Odoo database, its homepage can be accessed from Odoo by opening the IoT app, clicking the relevant IoT box’s card, and clicking Homepage.

Windows 가상 IoT 홈페이지

참고

Windows 방화벽 환경설정 에서 액세스가 허용되어 있는지 확인하세요.

Windows 가상 IoT 다시 시작하기

To manually restart the Windows IoT server, search the Windows start menu for services and select the Services app. Scroll down to the odoo-server-xxx service, right-click it, and select Start or Restart.

Windows 가상 IoT 제거

To uninstall the Windows virtual IoT, uninstall the Odoo program on your Windows computer. Confirm the uninstallation and complete the steps in the Odoo Uninstall dialog.