IoT system connection

To connect the POS with an IoT system:

  1. Make sure both the Point of Sale and Internet of Things (IoT) apps are installed on your database.

  2. Set up the IoT-box or Windows virtual IoT.

  3. Connect the peripheral devices to the IoT system:

    Enhet

    Instruktioner

    Skrivare

    Connect a supported receipt printer to a USB port or to the network, and power it on. Refer to Order printing.

    Kassalåda

    Kassalådan ska anslutas till skrivaren med en RJ25-kabel.

    Streckkodsläsare

    The barcode scanner must end barcodes with an ENTER character (keycode 28) in order for the barcode scanner to be compatible. This is most likely the barcode scanner’s default configuration.

    Trappor

    Connect the scale and power it on. Refer to Anslut en våg.

    Kunddisplay

    Connect a screen to the IoT box to display the PoS order. Refer to Anslut en skärm.

    Betalningsterminal

    Hur anslutningen går till beror på vilken terminal du använder. Se dokumentationen för betalterminaler.

  4. Connect the IoT system to your Odoo database.

  5. Access the POS settings and select your POS, or click the vertical ellipsis button (⋮) on a POS card and click Edit. Scroll down to the Connected Devices section, enable IoT Box, then select the devices to be used for the POS. Click Save.

Tips

Click IoT Devices to access the list of Anordningar for your POS and view their connection status. Click a card to access the device’s form.

Se även

Setup example

En föreslagen konfiguration för ett kassasystem.