Paie¶
Odoo Payroll is used to process work entries and create payslips for employees. Payroll works in conjunction with other Odoo apps, such as Employees, Time Off, Attendances, and Planning.
The Payroll app helps ensure there are no issues or conflicts when validating work entries. It also handles country-specific localizations to ensure payslips follow local rules and taxes, and allows for salary assignments.
Paramètres¶
Configure the Payroll app by navigating to
. The various settings for accounting, localizations, time off, alerts, and payslips are specified here.Comptabilité¶
The accounting section of the configuration menu relates to three options:
Payroll Entries: enable this option to post payroll slips in accounting.
Payroll SEPA: enable this option to create SEPA payments.
Batch Account Move Lines: enable this option to have a single account move line created from all the accounting entries from the same period. This disables the generation of single payments.
Localisation¶
Localizations are country-specific settings pre-configured in Odoo at the creation of the database, which account for all taxes, fees, and allowances for that particular country.
The Localization section of the Payroll app Settings page may include specific settings that need to be set for the specific locality. This selection also provides a detailed view of all benefits provided to employees.
The settings and options shown in this section varies, depending on the localization enabled for the database.
Avertissement
It is not recommended to alter the localization settings, unless specifically required.
Note
Odoo can handle a multi-company configuration. This is generally done when there is a main company or office location, such as a headquarters, and there are other offices/branches around the country or globe, that fall under that main company or headquarters. In Odoo, each company, including the headquarters, would be set up as their own company/branch using the multi-company method.
Each individual company can have a different localization setting configured for that specific company, since company locations can vary and be located anywhere in the world, where rules and laws differ.
For more information on companies, refer to the Companies documentation, which covers how to set up companies.
Congé¶
Deferred Time Off: if time off is taken after payslips are validated, the time off needs to be applied to the following pay period. Select the person responsible for validating these specific time off situations using the drop-down menu in the Responsible field.
Example
An employee is paid on the 15th of the month and the last day of the month. Payslips are typically processed a day before.
If an employee’s payslip is approved and processed on the 30th, but that same employee takes an unexpected sick day on the 31st, the time off needs to be logged.
Since the employee is already paid for a regular work day on the 31st, to keep the time off balances correct, the sick day is moved/applied to the 1st of the next month (the next pay period).
Paie¶
Contract Expiration Notice Period: enter the number of Days before a contract expires, and Odoo notifies the responsible person about the upcoming expiration at that time.
Work Permit Expiration Notice Period: enter the number of Days before a work permit expires, and Odoo notifies the responsible person about the upcoming expiration at that time.
Payslip PDF Display: enable this option to have payslips display a PDF file on the payslip form.
Contrats¶
In order for an employee to be paid, they must have an active contract for a specific type of employment. Creating and viewing contract templates, and creating and viewing employment types, is possible from this section of the configuration header menu.
Modèles¶
Contract templates are used with the Recruitment application when sending an offer to a candidate. The contract template forms the basis of an offer, and can be modified for specific candidates or employees, when necessary. If a contract template is created or modified in the Payroll application, the changes are also reflected in the Recruitment application.
Important
To access contract templates, the Salary Configurator (hr_contract_salary
) module must be
installed.
To view all the current contract templates in the database, navigate to
.On the Contract Templates page, all current contract templates appear in a list view. To view the details of a contract template, click anywhere on the line to open the contract form. The contract template can be modified from this form. Proceed to make any desired changes to the contract.
To create a new contract template, click the New button. Then, enter the following information on the blank contract template form that appears:
Contract Reference: enter a brief description for the template. This should be clear and easily understood, as this name appears in the Recruitment application, as well.
Working Schedule: select the desired working schedule the contract applies to from the drop-down menu. If a new working schedule is needed, create a new working schedule.
Work Entry Source: select how the work entries are generated. Choices are either:
Working Schedule: work entries are generated based on the selected working schedule.
Attendances: work entries are generated based on the employee’s attendance, as they are logged in the Attendances application. Refer to the Attendances documentation for information on checking in and out.
Planning: work entries are generated based on the employee’s planning in the Planning application.
Salary Structure Type: select the salary structure type from the drop-down menu.
Department: select the department the contract template applies to from the drop-down menu. If blank, the template applies to all departments.
Job Position: select the job position the contract template applies to from the drop-down menu. If blank, the template applies to all job positions.
Wage on Payroll: enter the monthly wage in the field.
Contract Type: select the type of contract from the drop-down menu. This list is the same as the Employment Types.
HR Responsible: select the employee responsible for validating contracts, using this template, from the drop-down menu.
New Contract Document Template: select a default document that a new employee has to sign to accept an offer.
Contract Update Document Template: select a default document that a current employee has to sign to update their contract.
Salary information tab¶
Wage Type: select either Fixed Wage or Hourly Wage from the drop-down menu.
Schedule Pay: using the drop-down menu, select how often the employee is paid. Options include Annually, Semi-annually, Quarterly, Bi-monthly, Monthly, Semi-monthly, Bi-weekly, Weekly, or Daily.
Wage: enter the gross wage. The time period presented in this field is based on what is selected for the Scheduled Pay field. It is recommended to populate the Yearly Cost (Real) field first, since that entry updates this field automatically.
Yearly Cost (Real): enter the total yearly cost the employee costs the employer. When this value is entered, the Monthly Cost (Real) is automatically updated.
Monthly Cost (Real): this field is not editable. The value is automatically populated after the Yearly Cost (Real) is entered.
Important
The Schedule Pay, Wage, and Yearly Cost (Real) fields are all linked. If any of these fields are updated, the other two fields automatically update to reflect the change. It is best practice to check these three fields if any modifications have been made, to ensure they are accurate.
Pre-tax benefits and post-tax deductions¶
Depending on the localization settings set for the company, the entries presented in this section either vary, or may not appear at all.
For example, some entries may pertain to retirement accounts, health insurance benefits, and commuter benefits.
Enter the monetary amounts or percentages to specify how much of the employee’s salary goes to the various benefits and/or deductions.
Employment types¶
To view all the pre-configured employment types, navigate to
.The employment types are presented in a list view on the Employment Types page.
The default employment types are Permanent, Temporary, Seasonal, Interim, Full-Time, Part-Time, and Permanent.
To make a new employment type, click the New button in the upper-left corner, and a blank line appears at the bottom of the Employment Types page.
On this new blank line, enter the name of the employment type in the Name column. If the employment type is country-specific, select the country using the drop-down menu in the Country column. If a country is selected, then the employment type is only applicable for that specific country.
To rearrange the order of the employment types, click the six small gray boxes icon to the left of the employment type Name, and drag the line to the desired position on the list.
Prestations¶
Une prestation est un enregistrement individuel sur la feuille de temps d’un employé. Les prestations peuvent être configurées pour comptabiliser tous les types de travail et de congés, tels que les Présences, les Congés de maladie, les Formations ou les Jours fériés.
Pour plus d'infos
Types de prestations¶
Lors de la création d’une prestation dans l’application Paie ou lorsqu’un employé saisit des informations dans l’application Feuilles de temps, vous devez sélectionner un Type de prestation. La liste des Types de prestations est créée automatiquement en fonction des paramètres de localisation définis dans la base de données.
To view the current work entry types available, go to
.Each work entry type has a code to aid in the creation of payslips, and to ensure all taxes and fees are correctly entered.
Nouveau type de prestation¶
To create a new Work Entry Type, click the New button, and enter the information for the following sections on the form.
General information section¶
Work Entry Type Name: the name should be short and descriptive, such as
Sick Time
orPublic Holiday
.Payroll Code: this code appears with the work entry type on timesheets and payslips. Since the code is used in conjunction with the Accounting application, it is advised to check with the accounting department for a code to use.
DMFA code: this code is used to identify DMFA entries on a corresponding DMFA report. The DMFA report is a quarterly report that Belgian-based companies are required to submit for social security reporting purposes. This report states the work done by the employees during the quarter, as well as the salaries paid to those employees.
External Code: this code is used for exporting data to a third-party payroll service. Check with the third-party being used to determine the External Code to enter for the new work entry type.
SDWorx code: this code is only for companies that use SDWorx, a payroll service provider.
Color: select a color for the particular work entry type.
Display in payslip section¶
Rounding: the rounding method selected determines how quantities on timesheet entries are displayed on the payslip.
No Rounding: a timesheet entry is not modified.
Half Day: a timesheet entry is rounded to the closest half day amount.
Day: a timesheet entry is rounded to the closest full day amount.
Example
Si le temps de travail est fixé à une journée de 8 heures (semaine de 40 heures) et qu’un employé saisit 5,5 heures sur une feuille de temps et que l’option Arrondi est définie sur Aucun arrondi, l’entrée reste à 5,5 heures. Si l”Arrondi est défini sur Demi-journée, l’entrée est modifiée en 4 heures. S’il est défini sur Journée, l’entrée est modifiée en 8 heures.
Unpaid section¶
Unpaid in Structures Types: if the work entry is for work that is not paid, specify which pay structure the unpaid work entry applies to from the drop-down menu. Some situations where work is logged on a timesheet, but no compensation given would be for unpaid internships, unpaid training, or volunteer work.
Valid for advantages section¶
Meal Voucher: if the work entry should count towards a meal voucher, check the box.
Representation Fees: if the work entry should count towards representation fees, check the box.
Private Car Reimbursement: if the work entry should count towards a private car reimbursement, check the box.
Time off options section¶
Time Off: check this box if the work entry type can be selected for a time off request, or entry, in the Time Off application.
If Time Off is checked, a Time Off Type field appears. This field has a drop-down menu to select the specific type of time off, such as
Paid Time Off
,Sick Time Off
, orExtra Hours
, for example.A new type of time off can be entered in the field, if the listed types of time off in the drop-down menu do not display the type of time off needed.
Keep Time Off Right: this is for Belgian-specific companies only, and does not appear for other localizations. Check this box if the work entry is for time off that affects the time off benefits for the following year. Workers are given time off each year, according to the government, and in some cases, time off taken during a specific time period can affect how much time off the employee receives or accrues the following year.
Reporting section¶
Unforeseen Absence: if the work entry should be visible on the unforeseen absences report, check this box.
Working schedules¶
To view the currently configured working schedules, go to
. The working schedules that are available for an employee’s contracts and work entries are found in this list.Working schedules are company-specific. Each company must identify each type of working schedule they use. If the database is created for only one company, the company column is not available.
Example
An Odoo database containing multiple companies that use a standard 40-hour work week needs to have a separate working schedule entry for each company that uses the 40-hour standard work week.
A database with five companies that all use a standard 40-hour work week needs to have five separate 40-hour working schedules configured.
New working schedule¶
To create a new working schedule, click the New button, and enter the information on the form.
Les champs sont préremplis pour une semaine de travail normale de 40 heures, mais ils peuvent être modifiés. Changez d’abord le nom de l’horaire en modifiant le texte dans le champ Nom. Ensuite, apportez les modifications nécessaires aux jours et aux heures qui s’appliquent au nouvel horaire.
Dans l’onglet Heures de travail, modifiez le Jour de la semaine, la Période du jour, et le Type de prestation en cliquant sur les menus déroulants de chaque colonne et en effectuant la sélection souhaitée. Les colonnes Heure de début et Heure de fin peuvent être modifiées en saisissant l’heure.
Note
L”Heure de début et l”Heure de fin doivent être au format 24 heures. Par exemple, 2:00 PM
doit être saisi comme 14:00
.
If the working time should be in a two-week configuration, click the Switch to 2 weeks calendar button in the top-left. This creates entries for an Even week and an Odd week.
Salaire¶
Types de structures¶
Dans Odoo, la fiche de paie d’un employé est basée sur des structures et des types de structures, qui impactent tous deux la manière dont un employé saisit les feuilles de temps. Chaque type de structure est un ensemble individuel de règles pour le traitement d’une entrée de feuille de temps, qui consiste en différentes structures imbriquées. Les types de structures définissent la fréquence à laquelle un employé est payé, l’horaire de travail et si les salaires sont basés sur une rémunération (fixe) ou sur le nombre d’heures travaillées par l’employé (variable).
Par exemple, un type de structure peut être Employé
et ce type de structure peut avoir deux différentes structures imbriquées : une structure Salaire régulier
qui comprend toutes les règles distinctes de traitement du salaire régulier, ainsi qu’une structure Prime de fin d'année
qui comprend uniquement les règles relatives à la prime de fin d’année. La structure Salaire régulier
et la structure Prime de fin d'année
sont toutes deux des structures appartenant au type de structure Employé
.
The different Structure Types can be seen by navigating to .
Two default structure types are configured in Odoo: Employee and Worker.
Typically, Employee is used for salaried employees, which is why the wage type is Monthly Fixed Wage, and Worker is typically used for employees paid by the hour, so the wage type is Hourly Wage.
New structure type¶
To make a new structure type, click the New button, and a blank structure type form appears.
Proceed to enter information in the fields. Most fields are pre-populated, but all the fields can be modified.
Structure Type: enter the name for the new structure type, such as
Employee
orWorker
.Country: select the country that the new structure type applies to from the drop-down menu.
Wage Type: select what type of wage the new structure type uses, either Fixed Wage or Hourly Wage.
If the type is to be used for salaried employees, who receive the same wage every pay period, select Fixed Wage.
If the type is to be used for employees, who receive wages based on how many hours they worked during a pay period, select Hourly Wage.
Default Scheduled Pay: select the typical pay schedule for the new structure type from the drop-down menu. Options are Monthly, Quarterly, Semi-annually, Annually, Weekly, Bi-weekly, Bi-monthly. This indicates how often this specific type of structure is paid out.
Default Working Hours: select the default working hours for the new structure type from the drop-down menu. All available working hours for the currently selected company appear in the drop-down menu. The default working hours that are pre-configured in Odoo is the Standard 40 hours/week option. If the needed working hours do not appear in the list, a new set of default working hours can be created.
Regular Pay Structure: type in the name for the regular pay structure.
Default Work Entry Type: select the default type of work entry the new structure type falls under from the drop-down menu. The default options include Attendance, Overtime Hours, Generic Time Off, Compensatory Time Off, Home Working, Unpaid, Sick Time Off, Paid Time Off, Out Of Contract, Extra Hours, and Long Term Time Off.
To view all the options for the Default Work Entry Type, click the Search More.. button at the bottom of the drop-down list.
Depending on the localization settings, this list may contain more options in addition to the default options.
New default working hours¶
To make new default working hours, type the name for the new working hours in the Default Working Hours field on the new structure type form. Click Create and edit. A default working hours form pops up. The default working hours form has two sections, a general information section and a tab listing out all the individual working hours by day and time. When the form is completed, click Save & Close.
Name: type in the name for the new default working hours. This should be descriptive and clear to understand, such as
Standard 20 Hours/Week
.Company: select the company that can use these new default working hours from the drop-down menu. Keep in mind, working hours are company-specific, and cannot be shared between companies. Each company needs to have their own working hours set.
Average Hour Per Day: the average hours per day field is auto-populated, based on the working hours configured in the Working Hours tab. This entry affects resource planning, since the average daily hours affect what resources can be used, and in what quantity, per work day.
Timezone: select the time zone to be used for the new default working hours from the drop-down menu.
Company Full Time: enter the number of hours per week an employee would need to work to be considered a full-time employee. Typically, this is approximately 40 hours, and this number affects what types of benefits an employee can receive, based on their employment status (full-time vs part-time).
Work Time Rate: this percentage is auto-generated based on the entry for the Company Full Time and the working hours configured in the Working Hours tab. This number should be between
0.00%
and100%
, so if the percentage is above100%
, it is an indication that the working times and/or Company Full Time hours need adjustment.Working Hours Tab: this tab is where each day’s specific working hours are listed. When a new default working hour form is created, the Working Hours tab is pre-populated with a default 40-hour week, with each day divided into three timed sections.
Every day has morning (8:00-12:00), lunch (12:00-13:00), and evening (13:00-17:00) hours configured, using a 24 hour time format.
To adjust any of these hours, click on the specific field to adjust, and make the adjustment using the drop-down menus, or in the specific case of the times, type in the desired time.
Keep in mind, working hours are company-specific, and cannot be shared between companies. Each company needs to have their own working hours set.
Note
If the working hours are not consistent each week, and the hours are on a bi-weekly schedule instead, click the Switch to 2 week calendar button at the top of the new default working hours form. This changes the Working Hours tab to display two weeks of working times that can be adjusted.
Structures¶
Les Structures salariales sont les différentes façons dont un employé est payé au sein d’une structure spécifique et sont spécifiquement définies par plusieurs règles.
Le nombre de structures dont une entreprise a besoin pour chaque type de structure dépend du nombre de modes de rémunération des employés et de la manière dont leur salaire est calculé. Par exemple, une structure commune utile à ajouter pourrait être une Prime
.
To view all the various structures for each structure type, go to
.Chaque type de structure répertorie les différentes structures qui lui sont associées. Chaque structure contient un ensemble de règles qui la définissent.
Cliquez sur une structure pour afficher ses Règles salariales. Ces règles permettent de calculer la fiche de paie de l’employé.
Règles¶
Each structure has a set of salary rules to follow for accounting purposes. These rules are configured by the localization, and affect actions in the Accounting application, so modifications to the default rules, or the creation of new rules, should only be done when necessary.
To view all the rules, go to Regular Pay) to view all the rules.
. Click on a structure (such asTo make a new rule, click New. A new rule form appears. Enter the following information in the fields.
Top section¶
Rule Name: enter a name for the rule. This field is required.
Category: select a category the rule applies to from the drop-down menu, or enter a new one. This field is required.
Code: enter a code to be used for this new rule. It is recommended to coordinate with the accounting department for a code to use as this affects accounting reports and payroll processing. This field is required.
Sequence: enter a number indicating when this rule is calculated in the sequence of all other rules.
Salary Structure: select a salary structure the rule applies to from the drop-down menu, or enter a new one. This field is required.
Active: enable this toggle, so the rule is available for use. Disable the toggle to hide the rule without deleting it in the database.
Appears on payslip: tick the checkbox to have the rule appear on employee payslips.
View on Employer Cost Dashboard: tick the checkbox to have the rule appear on the Employer Cost report, located on the Payroll app dashboard.
View on Payroll Reporting: tick the checkbox to have the rule appear on payroll reports.
General tab¶
Conditions¶
Condition Based on: select from the drop-down menu whether the rule is Always True (always applies), a Range (applies to a specific range, which is entered beneath the selection), or a Python Expression (the code is entered beneath the selection). This field is required.
Calcul¶
Amount Type: select from the drop-down menu whether the amount is a Fixed Amount, a Percentage (%), or a Python Code. Depending on what is selected, the fixed amount, percentage, or Python code needs to be entered next. This field is required.
Company contribution¶
Partner: if another company financially contributes to this rule, select the company from the drop-down menu.
Onglet Description¶
Provide any additional information in this tab to help clarify the rule. This tab only appears in the rule form.
Accounting tab¶
Debit Account: select the debit account from the drop-down menu the rule affects.
Credit Account: select the credit account from the drop-down menu the rule affects.
Not computed in net accountability: tick the checkbox to delete the value of this rule in the
Net Salary
rule.
Paramètres de la règle¶
Note
Currently, the Rule Parameters feature found inside the menu is still in development and only serves a specific use case for Belgian markets. The documentation will be updated when this section has matured to more markets.
Autres types d’entrées¶
When creating payslips, it is sometimes necessary to add other entries for specific circumstances, like expenses, reimbursements, or deductions. These other inputs can be configured by navigating to
.To create a new input type, click the New button. Enter the Description, the Code, and which structure it applies to in the Availability in Structure field.
Important
The Code is used in the salary rules to compute payslips. If the Availability in Structure field is left blank, it indicates that the new input type is available for all payslips and is not exclusive to a specific structure.
Salary attachment types¶
Salary attachments, also thought of as « wage garnishments », are portions of earnings taken out of a payslip for something specific. Much like all other aspects of payroll configurations, the types of salary attachments must be defined.
To view the currently configured salary attachments, navigate to Attachment of Salary, Assignment of Salary, and Child Support.
. The default salary attachment types areTo make a new type of salary attachment, click the New button. Then, enter the Name, the Code (used in the salary rules to compute payslips), and decide if it should have No End Date.
Configurateur du package salarial¶
The various options under the Salary Package Configurator section of the menu all affect an employee’s potential salary. These sections (Benefits, Personal Info, and Resume) specify what benefits can be offered to an employee in their salary package.
Depending on what information an employee enters (such as deductions, dependents, etc.), their salary is adjusted accordingly. When an applicant applies for a job on the company website, the sections under Salary Package Configurator directly affect what the applicant sees, and what is populated, as the applicant enters information.
Avantages¶
When offering potential employees a position, there can be certain benefits set in Odoo, in addition to the salary, to make an offer more appealing (such as extra time off, the use of a company car, reimbursement for a phone or internet, etc.).
To view the benefits, go to Structure type, and the benefit listed for a particular structure type is only available for that specific structure.
. Benefits are grouped byExample
A company has two structure types, one labeled Employee, and another labeled Intern. The Employee structure type contains the benefit of using a company car, while the Intern structure type has a meal voucher benefit available.
A person hired under the Employee structure type can use the company car benefit, but cannot have meal vouchers. A person hired under the Intern structure type would have meal voucher benefits available to them, not the use of a company car.
To make a new benefit, click the New button, and enter the information in the fields on the blank benefits form.
The various fields for creating a benefit are as follows:
General information section¶
Benefits: enter the name for the benefit. This field is required.
Benefit Field: select from the drop-down menu the type of benefit this is.
Cost Field: select from the drop-down menu the type of cost incurred by the company for this specific benefit. The default options are Calendar Changed, Yearly Cost (Real), Extra Time Off, Hourly Wage, Part Time, Wage, Wage with Holidays, and Work time rate. Depending on the localization settings, additional options are available.
Related Type: select from the drop-down menu what type of benefit it is. Select from Monthly Benefit in Kind, Monthly Benefit in Net, Monthly Benefit in Cash, Yearly Benefits in Cash, or Non Financial Benefits. This field is required.
Benefit Field: select from the drop-down menu the specific field on the contract the benefit appears.
Cost Field: select the specific field on the contract that the cost of the benefit is linked to, using the drop-down menu. If this field is left blank, the cost of the benefit is not computed in the employee budget.
Impacts Net Salary: tick the checkbox if the benefit should impact the employee’s net salary.
Requested Documents: select any document that is required to be submitted for this benefit, from the drop-down menu.
Mandatory Benefits: using the drop-down menu, select the benefit that is required in order for this specific benefit to be offered to the employee.
For example, a benefit for car insurance would populate
Company Car
in this field. This would allow the car insurance benefit to only be displayed if the employee has selected/enabled the benefit of a company car.Salary Structure Type: select from the drop-down menu which salary structure type this benefit applies to. This field is required.
Unit of Measure: select the metric that the benefit is granted, using the drop-down menu. The options are Days, Percent, or Currency.
Display section¶
Show Name: tick the checkbox to have the benefit name appear in the salary package configurator.
Display Type: select from the drop-down menu how this benefit is displayed. The options are Always Selected, Dropdown, Dropdown Group, Slider, Radio Buttons, Manual Input, or Text. This field is required.
Depending on the selection made, additional configurations need to be made. For example, if Radio Buttons is selected, the individual radio buttons must be entered.
Icon: an icon from the Font Awesome 4 library can be visible for this benefit. Enter the text code for the icon in this field. For example, to display a suitcase icon, the code
fa fa-suitcase
is entered on this line.Hide Description: tick the checkbox to hide the benefit description if the benefit is not selected by the employee.
Folded: if the benefit should be folded, or hidden, because it is dependant on another benefit selection, tick the checkbox. The following fields appear when this is active:
Fold Label: enter a name for the folded section of the benefit.
Fold Res Field: select the contract field this benefit is tied to using the drop-down menu. If this field is selected on the contract, then this benefit becomes visible.
Activity section¶
Activity Type: from the drop-down menu, select the activity type that is automatically created when this benefit is selected by the employee.
Activity Creation: select when the activity is created, either when the Employee signs his contract, or when the Contract is countersigned. Click the radio button next to the desired selection.
Activity Creation Type: select the parameters for when the activity is created, either When the benefit is set or When the benefit is modified. Click the radio button next to the desired selection.
Assigned to: select the user the activity is automatically assigned to, using the drop-down menu.
Sign section¶
Template to Sign: if the employee is required to sign a document when selecting this benefit, select the document template from the drop-down menu.
For example, a benefit regarding the use of a company car may require the employee to sign a document acknowledging the company’s car policies.
Onglet Description¶
Provide any additional information in this tab to help clarify the benefit.
Informations personnelles¶
Every employee in Odoo has an employee card which is created when a candidate becomes an employee. This card includes all of their personal information, resume, work information, and documents.
The personal information is gathered from the salary package configurator section that a candidate fills out after being offered a position. This personal information is then transferred to the employee card when they are hired.
To view an employee’s card, go to the main
app dashboard, and click on the employee’s card.Note
Une fiche d’employé peut être considérée comme un dossier personnel de l’employé.
The Personal Info section lists all of the fields that are available to enter on the employee’s card. To access this section, go to .
To edit a personal info entry, select an entry from the list on the Personal Info page, and modify the personal info on the form that appears.
To create a new personal info entry, click the New button.
The required fields, aside from entering the Information name, are Related Model, Related Field, and Category.
Select a Related Model from the drop-down menu. Employee populates the field by default, but the Bank Account option is also available if the information is related to a bank account, instead.
Select a Related Field from the drop-down menu that best describes what kind of personal information this entry is, and where it is stored in the backend. Then, select a Category from the drop-down menu that the personal information should be under, such as Address or Personal Documents.
The two most important fields on the personal info form are Is Required and Display Type.
Checking the Is Required box makes the field mandatory on the employee’s card. The Display Type drop-down menu allows for the information to be entered in a variety of ways, like a Text box, to a customizable Radio button, a Checkbox, a Document, and more.
CV¶
The resumé section, housed within the salary package configurator section of the settings menu, is how salary information rules are configured when offering a position to potential employees.
When an offer is sent to a prospective employee, the values for the offer are computed from these settings, and appear on the offer page.
To configure this section, navigate to
.By default, there are three Salary Structure Types pre-configured in Odoo: Worker, Employee, and None.
Each Salary Structure Type has several rules configured. These affect how an offer is calculated using that particular Salary Structure Type.
To create a new rule, click the New button, and a blank Contract Salary Resumé form loads.
Enter the following information on the form:
Information: type in a name for this field.
Category: select the category this value is housed under, using the drop-down menu. The default options are Monthly Salary, Monthly Benefits, Yearly Benefits, and Total.
New categories can be made if needed.
Click the New button, then enter the name for the new category in the Name field. Next, select the Periodicity from the drop-down menu, either Monthly or Yearly. Last, enter a number for the sequence. This corresponds to where this rule appears in the Salary Structure Type rule list.
Finally, click Save & Close.
Impacts Monthly Total: tick the checkbox if this value is added in the monthly total calculation.
Unit of Measure: select what kind of value this rule is, either Currency, Days, or Percent.
Currency is for a set monetary value, Days is for compensation in the form of time off, and Percent is for a monetary value awarded that is based upon another metric, such as commissions.
Salary Structure Type: select which Salary Structure Type this rule is nested under, from the drop-down menu.
Value Type: select how the value is computed, using the drop-down menu. The default options are Fixed Value, Contract Value, Payslip Value, Sum of Benefits Values, and Monthly Total.
Code: select the code this rule applies to from the drop-down menu.
Postes¶
Since the Payroll application is responsible for paying employees for specific job positions, the complete list of job positions can be found in both the Payroll and Recruitment applications.
Postes¶
The job positions listed in the Payroll application are identical to the job positions listed in the Recruitment application. If a new job position is added in the Recruitment application, it is also visible in the Payroll application, and vice versa.
To view the job positions, navigate to
.A list of all the job positions appear, along with the corresponding department, on the Job Position page.
To create a new job description, click the New button and a job form appears.
Enter the information on the form for the new position. The information is identical as to the information entered when creating a new job position in the Recruitment application.
Refer to the Postes documentation for more details on how to fill out this form.
Pour plus d'infos