IoT system connection

To connect the POS with an IoT system:

  1. Make sure both the Point of Sale and Internet of Things (IoT) apps are installed on your database.

  2. Set up the IoT box or IoT virtuel Windows.

  3. Connect the peripheral devices to the IoT system:

    Périphérique

    Instructions

    Imprimante

    Connect a supported receipt printer to a USB port or to the network, and power it on. Refer to Imprimer des commandes.

    Tiroir caisse

    Le tiroir caisse doit être connecté à l’imprimante via un câble RJ25.

    Lecteur de codes-barres

    The barcode scanner must end barcodes with an ENTER character (keycode 28) in order for the barcode scanner to be compatible. This is most likely the barcode scanner’s default configuration.

    Balance

    Connect the scale and power it on. Refer to Connecter une balance.

    Écran client

    Connect a screen to the IoT box to display the PoS order. Refer to Connecter un écran.

    Terminal de paiement

    Le processus de connexion dépend du terminal. Consultez la documentation relative aux terminaux de paiement.

  4. Connect the IoT system to your Odoo database.

  5. Access the POS settings and select your POS, or click the vertical ellipsis button () on a POS card and click Edit. Scroll down to the Connected Devices section, enable IoT Box, then select the devices to be used for the POS. Click Save.

Astuce

Click IoT Devices to access the list of Périphériques for your POS and view their connection status. Click a card to access the device’s form.

Setup example

Une proposition de configuration d'un système de point de vente.