IoT system connection

To connect the POS with an IoT system:

1. Make sure both the Point of Sale and Internet of Things (IoT) apps are installed on your database.

2. Set up the IoT box or Windows virtual IoT.

3. Connect the peripheral devices to the IoT system:

   Apparaat	Instructies
   Printer	Connect a supported receipt printer to a USB port or to the network, and power it on. Refer to Bestellingen afdrukken.
   Kassalade	De kassalade moet worden aangesloten op de printer met een RJ25-kabel.
   Barcodescanner	The barcode scanner must end barcodes with an ENTER character (keycode 28) in order for the barcode scanner to be compatible. This is most likely the barcode scanner’s default configuration.
   Schaal	Connect the scale and power it on. Refer to Sluit een weegschaal aan.
   Klantweergave	Connect a screen to the IoT box to display the PoS order. Refer to Een scherm aansluiten.
   Betaalterminal	Het verbindingsproces is afhankelijk van de terminal. Raadpleeg de documentatie betaalterminals.

4. Connect the IoT system to your Odoo database.

5. Access the POS settings and select your POS, or click the vertical ellipsis button (⋮) on a POS card and click Edit. Scroll down to the Connected Devices section, enable IoT Box, then select the devices to be used for the POS. Click Save.

Tip

Click IoT Devices to access the list of Apparaten for your POS and view their connection status. Click a card to access the device’s form.

Zie ook

• List of supported hardware.

• IoT documentation

Setup example