三步制造¶
Odoo 制造 允许用户使用一个、两个或三个步骤制造产品。使用三步制造法时，Odoo 会创建分拣组件转移、制造订单（MO）和存储成品转移，并根据取出的组件和创建的成品数量更新库存计数。
小訣竅
The number of steps used in manufacturing is set at the warehouse level, allowing for each warehouse to use a different number of steps. To change the number of steps used for a specific warehouse, begin by navigating to , and then select a warehouse from the Warehouses screen.
On the Warehouse Configuration tab, find the Manufacture radio input field, and select one of the three options: Manufacture (1 step), Pick components and then manufacture (2 steps), or Pick components, manufacture and then store products (3 steps).
重要
Products must be properly configured before they can be manufactured in Odoo. For details on how to do so, see the documentation on how to configure a product for manufacturing.
Create manufacturing order¶
To manufacture a product in Odoo Manufacturing, begin by navigating to , and then click New to create a new MO.
在新的 MO 上，从 产品 下拉菜单中选择要生产的产品。guilabel:`物料清单’字段会自动填充相关的物料清单（BoM）。
If a product has more than one BoM configured for it, the specific BoM can be selected in the Bill of Material field, and the Product field auto-populates with the associated product.
After a BoM has been selected, the Components and Work Orders tabs auto-populate with the components and operations specified on the BoM. If additional components or operations are required for the MO being configured, add them to the Components and Work Orders tabs by clicking Add a line.
最后，单击 确认，以确认 MO。
Process pick components transfer¶
确认三步 MO 后，页面顶部会出现一个 转移 智能按钮。点击该按钮，进入|MO|的:guilabel:`转移`页面。该页面列出了两种传输方式： WH/PC/XXXXX （拣选组件转移）和 WH/SFP/XXXXX （存储成品转移）。
选择 WH/PC/XXXXX，打开 MO 的拣选组件传输。该传送用于跟踪部件从存放地点到用于制造产品的地点的移动。
将组件从存储位置转移出来后，点击转移顶部的 验证，然后在弹出的 立即转移?`窗口中点击 :guilabel:`应用。这样做会将传输标记为 完成，并更新库存计数，以反映传输的组件数量。
最后，点击页面顶部的 WH/MO/XXXXX 面包屑导航，返回 MO。
Process manufacturing order¶
An MO is processed by completing all of the work orders listed under its Work Orders tab. This can be done on the MO itself, or from the work order tablet view.
Basic workflow¶
要从 MO 本身完成工单，首先要导航到:menuselection:制造-->操作-->制造单，然后选择一个制造单。
On the MO page, select the Work Orders tab. Once work begins on the first work order that needs to be completed, click the Start button for that work order. Odoo Manufacturing then starts a timer that keeps track of how long the work order takes to complete.
When the work order is completed, click the Done button for that work order. Repeat the same process for each work order listed on the Work Orders tab.
After completing all of the work orders, click Produce All at the top of the screen to mark the MO as Done, and register the manufactured product(s) into inventory.
Tablet view workflow¶
To complete the work orders for an MO using the tablet view, begin by navigating to , and then select a manufacturing order.
Next, click on the Work Orders tab, and then select the 📱 (tablet) button on the line of the first work order to be processed. This opens the tablet view.
After opening the tablet view, Odoo Manufacturing automatically starts a timer that keeps track of how long the work order takes to complete. After completing the work order, click the Mark as Done button in the top-right corner of the tablet view.
Clicking Mark as Done while there is at least one more work order left to complete opens a page that lists the next work order. Click on that work order to open it in the tablet view.
一旦 MO 最终工单完成，除:guilabel:标记为完成并关闭 MO`按钮外，平板视图上还会出现一个:guilabel:`标记为完成并关闭 MO`按钮。单击 :guilabel:`标记为已完成并关闭 MO 将 MO 标记为 已完成，并将生产的产品登记到库存中。
也可以通过单击 标记为已完成，在打开 MO 的同时完成最终工单。在这种情况下，可在稍后单击 MO 上的:guilabel:`生产全部`按钮关闭 MO。
加工成品转移¶
完成 MO 后，点击订单顶部的 转移 按钮返回订单的 转移 页面。这次，选择 WH/SFP/XXXXX 打开商店成品转移。此转移用于追踪成品从生产地到存储地的移动。
将成品转移到存储位置后，点击转移顶部的 验证』，然后在弹出的 :guilabel: 立即转移?`窗口中点击 应用。这样做会将转移标记为 完成，并更新库存计数以反映转移的成品数量。