连接相机¶
只需几个步骤,就可将相机连接到带有 Odoo 数据库的 IoT(物联网) 盒子。相机连接到 :abbr:`IoT(物联网)`盒子后,可用于生产过程,也可连接到质量控制点/质量检查。这样,当达到选定的质量控制点/检查点时,或者在制造过程中按下特定按键时,就可以拍摄照片。
连接¶
要将相机连接到 :abbr:`IoT (物联网)`盒子,只需通过电缆将两者连接起来。通常使用某种 :abbr:`USB(通用串行总线)`电缆来实现。
如果您的相机在 `支持的设备 <https://www.odoo.com/page/iot-hardware>`_中,则无需进行任何设置,因为一旦连接就会自动检测到。
将相机与制造过程中的质量控制点连接起来¶
在 质量控制点 上设置设备。请导航到 ,然后打开要链接到摄像机的 控制点。
中,可在On the control point form, edit the control point by selecting the Type field, and clicking on Take a Picture from the drop-down menu. Doing so reveals a field called Device, wherein the attached device can be selected. Save the changes, if required.
The camera is now useable with the selected quality control point. When the quality control point is reached during the manufacturing process, the database prompts the operator to take a picture.
注解
还可以通过导航至 `质量控制点`选项卡,可以在其中添加设备。
访问质量控制点。在此选择设备。有一个:guilabel:小技巧
在质量检查表单中,检查的 Type 类型也可指定为 拍照。导航至 ,从 质量检查 页面创建新的质量检查。
在制造应用中将相机连接到工作中心¶
要将相机连接到操作,首先需要在工作中心上进行配置。导航至 工作中心,该工作中心将使用相机来显示特定工作中心的详细表单。在此,点击 添加行,在 联网触发器 选项卡的 设备 列中添加设备。
。然后,转到所需的现在,相机设备可以连接到 操作 列中标有 拍照 的下拉选项。还可以添加一个键来触发该操作。
重要
The first trigger listed is chosen first. The order of triggers matters, and they can be dragged into any desired order.
注解
On the Work Order screen, a status graphic indicates whether the database is correctly connected to the camera.