Chapter 2: Development environment setup¶
Depending on the intended use case, there are multiple ways to install Odoo. For developers of the Odoo community and Odoo employees alike, the preferred way is to perform a source install (running Odoo from the source code).
Prepare the environment¶
First, follow the Environment setup section of the contributing guide to prepare your environment.
Belangrijk
The following steps are intended only for Odoo employees. The mentioned repositories are not accessible to third parties.
By now, you should have downloaded the source code into two local repositories, one for odoo/odoo
and one for odoo/enterprise
. These repositories are set up to push changes to pre-defined shared
forks on GitHub. This will prove to be convenient when you start contributing to the codebase, but
for the scope of this tutorial, we want to avoid polluting the shared repositories with training
material. Let’s then develop your own module in a third repository technical-training-sandbox
.
Like the first two repositories, it will be part of the addons-path
that references all
directories containing Odoo modules.
Following the same process as with the
odoo/odoo
andodoo/enterprise
repositories, visit github.com/odoo/technical-training-sandbox and click the Fork button to create a fork of the repository under your account.Clone the repository on your machine with:
$ git clone git@github.com:odoo/technical-training-sandbox.git
Configure the repository to push changes to your fork:
$ cd technical-training-sandbox/ $ git remote add dev git@github.com:<your_github_account>/technical-training-sandbox.git $ git remote set-url --push origin you_should_not_push_on_this_repository
That’s it! Your environment is now prepared to run Odoo from the sources, and you have successfully created a repository to serve as an addons directory. This will allow you to push your work to GitHub.
Now, make a small change in the technical-training-sandbox
repository, such as updating the
README.md
file. Then, follow the Make your first contribution section
of the contributing guide to push your changes to GitHub and create a PR.
This will enable you to share your upcoming work and receive feedback. Adjust the instructions to
use the branch master
and the repository technical-training-sandbox
.
To ensure a continuous feedback loop, we recommend pushing a new commit as soon as you reach a new milestone, such as completing a chapter of the tutorial.
Notitie
The specific location of the repositories on your file system is not crucial. However, for the
sake of simplicity, we will assume that you have cloned all the repositories under the same
directory. If this is not the case, make sure to adjust the following commands accordingly,
providing the appropriate relative path from the odoo/odoo
repository to the
odoo/technical-training-sandbox
repository.
Run the server¶
Launch with odoo-bin
¶
Once all dependencies are set up, Odoo can be launched by running odoo-bin
, the command-line
interface of the server.
$ cd $HOME/src/odoo/
$ ./odoo-bin --addons-path="addons/,../enterprise/,../technical-training-sandbox" -d rd-demo
There are multiple command-line arguments that you can use to run the server. In this training you will only need some of them.
- -d <database>¶
The database that is going to be used.
- --addons-path <directories>¶
A comma-separated list of directories in which modules are stored. These directories are scanned for modules.
- --limit-time-cpu <limit>¶
Prevent the worker from using more than <limit> CPU seconds for each request.
- --limit-time-real <limit>¶
Prevent the worker from taking longer than <limit> seconds to process a request.
Tip
The
--limit-time-cpu
and--limit-time-real
arguments can be used to prevent the worker from being killed when debugging the source code.- You may face an error similar to
AttributeError: module '<MODULE_NAME>' has no attribute '<$ATTRIBUTE'>
. In this case, you may need to re-install the module with $ pip install --upgrade --force-reinstall <MODULE_NAME>.If this error occurs with more than one module, you may need to re-install all the requirements with $ pip install --upgrade --force-reinstall -r requirements.txt.You can also clear the python cache to solve the issue:$ cd $HOME/.local/lib/python3.8/site-packages/ $ find -name '*.pyc' -type f -delete
Other commonly used arguments are:
Log in to Odoo¶
Open http://localhost:8069/ on your browser. We recommend using Chrome, Firefox, or any other browser with development tools.
To log in as the administrator user, use the following credentials:
email:
admin
password:
admin
Enable the developer mode¶
The developer or debug mode is useful for training as it gives access to additional (advanced) tools. In the next chapters, we will always assume that you have enabled the developer mode.
Enable the developer mode now. Choose the method that you prefer; they are all equivalent.
Notitie
The main page of the Settings screen is only accessible if at least one application is installed. You will be led into installing your own application in the next chapter.
Extra tools¶
Useful Git commands¶
Here are some useful Git commands for your day-to-day work.
- Switch branches:When you switch branches, both repositories (odoo and enterprise) must be synchronized, i.e. both need to be in the same branch.
$ cd $HOME/src/odoo $ git switch 14.0 $ cd $HOME/src/enterprise $ git switch 14.0
Fetch and rebase:
$ cd $HOME/src/odoo $ git fetch --all --prune $ git rebase --autostash odoo/14.0 $ cd $HOME/src/enterprise $ git fetch --all --prune $ git rebase --autostash enterprise/14.0
Code Editor¶
If you are working at Odoo, many of your colleagues are using VSCode, VSCodium (the open source equivalent), PyCharm, or Sublime Text. However, you are free to choose your preferred editor.
It is important to configure your linters correctly. Using a linter helps you by showing syntax and semantic warnings or errors. Odoo source code tries to respect Python’s and JavaScript’s standards, but some of them can be ignored.
For Python, we use PEP8 with these options ignored:
E501
: line too longE301
: expected 1 blank line, found 0E302
: expected 2 blank lines, found 1
For JavaScript, we use ESLint and you can find a configuration file example here.
Administrator tools for PostgreSQL¶
You can manage your PostgreSQL databases using the command line as demonstrated earlier or using a GUI application such as pgAdmin or DBeaver.
To connect the GUI application to your database we recommend you connect using the Unix socket.
Host name/address:
/var/run/postgresql
Port:
5432
Username:
$USER
Python Debugging¶
When facing a bug or trying to understand how the code works, simply printing things out can go a long way, but a proper debugger can save a lot of time.
You can use a classic Python library debugger (pdb, pudb or ipdb), or you can use your editor’s debugger.
In the following example we use ipdb, but the process is similar with other libraries.
Install the library:
pip install ipdb
Place a trigger (breakpoint):
import ipdb; ipdb.set_trace()
Example
def copy(self, default=None): import ipdb; ipdb.set_trace() self.ensure_one() chosen_name = default.get('name') if default else '' new_name = chosen_name or _('%s (copy)') % self.name default = dict(default or {}, name=new_name) return super(Partner, self).copy(default)
Here is a list of commands:
- h(elp) [command]¶
Print the list of available commands if not argument is supplied. With a command as an argument, print the help about that command.
- pp expression¶
The value of the
expression
is pretty-printed using thepprint
module.
- w(here)¶
Print a stack trace with the most recent frame at the bottom.
- d(own)¶
Move the current frame one level down in the stack trace (to a newer frame).
- u(p)¶
Move the current frame one level up in the stack trace (to an older frame).
- n(ext)¶
Continue the execution until the next line in the current function is reached or it returns.
- c(ontinue)¶
Continue the execution and only stop when a breakpoint is encountered.
- s(tep)¶
Execute the current line. Stop at the first possible occasion (either in a function that is called or on the next line in the current function).
- q(uit)¶
Quit the debugger. The program being executed is aborted.
Now that your server is running, it’s time to start writing your own application!