Kosten

Odoo Expenses streamlines the management of expenses. After an employee submits their expenses in Odoo, the expenses are reviewed by management and accounting teams. Once approved, payments can then be processed and disbursed back to the employee for reimbursement(s).

Set expense types

The first step to track expenses is to configure the different expense types for the company (managed as products in Odoo). Each “product” can be as specific or generalized as needed. Go to Expenses app ‣ Configuration ‣ Expense Products to view the current expensable products in a default kanban view.

Set expense costs on products.

To create a new expense product, click Create. A product form will appear. Only the Product Name and Unit of Measure fields are required to create a new expense product. Enter the Product Name in the field, and select the Unit of Measure from the drop-down menu (most products will be set to Units, which is the default selection).

Tip

The Sales app is where specification on the units of measure are created and edited (e.g. units, miles, nights, etc.). Go to Sales app ‣ Configuration ‣ Settings and ensure Units of Measure is enabled in the Product Catalog section. Click on the Units of Measure internal link to view, create, and edit the units of measure. Refer to this document to learn more about units of measure and how to configure them.

Set expense costs on products.

The Cost field on the product form is populated with a value of 0.00 by default. When a specific expense should always be reimbursed for a particular price, enter that amount in the Cost field. Otherwise, leave the Cost set to 0.00, and employees will report the actual cost when submitting an expense report.

Example

Here are some examples for when to set a specific Cost on a product vs. leaving the Cost at 0.00:

  • Meals: Set the Cost to 0.00. When an employee logs an expense for a meal, they enter the actual amount of the bill and will be reimbursed for that amount. An expense for a meal costing $95.23 would equal a reimbursement for $95.23.

  • Mileage: Set the Cost to 0.30. When an employee logs an expense for “mileage”, they enter the number of miles driven, and are reimbursed 0.30 per mile they entered. An expense for 100 miles would equal a reimbursement for $30.00.

  • Monthly Parking: Set the Cost to 75.00. When an employee logs an expense for “monthly parking”, the reimbursement would be for $75.00.

  • Expenses: Set the Cost to 0.00. When an employee logs an expense that is not a meal, mileage, or monthly parking, they use the generic Expenses product. An expense for a laptop costing $350.00 would be logged as an Expenses product, and the reimbursement would be for $350.00.

Select an Expense Account if using the Odoo Accounting app. It is recommended to check with the accounting department to determine the correct account to reference in this field as it will affect reports.

Set a tax on each product in the Vendor Taxes and Customer Taxes fields if applicable. It is considered good practice to use a tax that is configured with Tax Included in Price. Taxes will be automatically configured if this is set.

Record expenses

Manually create a new expense

To record a new expense, begin in the main Expenses app dashboard, which presents the default My Expenses to Report view. This view can also be accessed from Expenses app ‣ My Expenses ‣ My Expenses to Report.

First, click Create, and then fill out the various fields on the form.

  • Description: Enter a short description for the expense in the Description field. This should be short and informative, such as lunch with client or hotel for conference.

  • Product: Select the product from the drop-down menu that most closely corresponds to the expense. For example, an airplane ticket would be appropriate for an expense Product named Air Travel.

  • Total: Enter the total amount paid for the expense in one of two ways:

    1. If the expense is for one single item/expense with a variable price, enter the cost in the Total field. Odoo will not display the Quantity field for a product if it does not need to have the quantity specified (a product with a unit price of 0.00 and a quantity of 1.00).

    2. If the expense is for multiples of the same item/expense with a fixed price, the Unit Price is displayed. Enter the quantity in the Quantity field, and the Total is automatically updated with the correct total (the Quantity x the Unit Price = the Total).

      Example

      For example, in the case of mileage driven, the Unit Price would be set in the product form as the cost per mile. Simply set the Quantity to the number of miles driven, and the total for the expense is updated.

  • Bill Reference: If there is any reference text that should be included for the expense, enter it in this field. This field is not visible for expense products that require a Quantity to be entered.

  • Expense Date: Using the calendar module, enter the date the expense was incurred. Use the < (left) and > (right) arrows to navigate to the correct month, then click on the specific day to enter the selection.

  • Account: Select the expense account that this expense should be logged on from the drop-down menu.

  • Customer to Reinvoice: If the expense is something that should be paid for by a customer, select the customer and related sales order that will be invoiced for this expense from the drop-down menu. For example, if a customer wishes to have a custom designed piece of furniture, and purchased design hours from our employee, that sales order listing the hours would be referenced as the Customer to Reinvoice. In the list view, there may be many different sales orders referencing the same company, so be sure the correct sales order is selected.

Notitie

The Customer to Reinvoice field is only visible if the expense product has either At cost or Sales price selected under the Re-Invoice Expenses section. If No is selected for the Re-Invoice Expenses section, the Customer to Reinvoice field is hidden.

  • Analytic Account: Select the account the expense should be written against from the drop-down menu.

  • Company: If multiple companies are set-up, select the company this expense should be filed for from the drop-down menu. If there is only one company, this field will be automatically populated.

  • Employee: Using the drop-down menu, select the employee this expense is for.

  • Paid By: Click the radio button to indicate who paid for the expense and should be reimbursed. If the employee paid for the expense (and should be reimbursed) select Employee (to reimburse). If the company paid directly instead (e.g. if the company credit card was used to pay for the expense) select Company.

  • Notes…: If any notes are needed in order to clarify the expense, enter them in the notes field.

Once all the fields have been filled out, click Save.

A filled in expense form for a client lunch.

Attach a receipt

After the expense is saved, the next step is to attach a receipt. A new Attach Receipt button appears after the entry is saved, beneath the former Save button (which turns into an Edit button).

Attach a receipt after saving the record.

Click the new Attach Receipt button, and a file explorer appears. Navigate to the receipt to be attached, and click Open. The new receipt is recorded in the chatter, and the number of receipts will appear next to the 📎(paperclip) icon beneath the expense form. More than one receipt can be attached to an individual expense, as needed. The number of receipts attached to the expense will be noted on the paperclip icon.

View receipts in the chatter and see how many receipts are attached byu looking at the paperclip icon in the chatter beneath the record.

Create new expenses from a scanned receipt

Rather than manually inputting all of the information for an expense, expenses can be created automatically by scanning a PDF receipt.

First, in the main Expenses app dashboard view (this view can also be accessed from Expenses app ‣ My Expenses ‣ My Expenses to Report), click Scan, and a file explorer pops up. Navigate to the receipt to be uploaded, click on it to select it, and then click Open.

Create an expense by scanning a receipt. Click Scan at the top of the Expenses dashboard view.

The receipt is scanned, and a new entry is created with today’s date as the Expense Date, and any other fields it can populate based on the scanned data, such as the total. Click on the new entry to open the individual expense form, and click Edit to make changes. The receipt that was scanned in appears in the chatter. Make any edits to the form, then click Save when all the information is entered.

Automatically create new expenses from an email

Instead of individually creating each expense in the Expenses app, expenses can be automatically created by sending an email to an email alias.

To do so, first, an email alias needs to be configured. Go to Expenses app ‣ Configuration ‣ Settings. Ensure Incoming Emails is enabled.

Create the domain alias by clicking the link.

Notitie

If the domain alias needs to be set up, Setup your domain alias will appear beneath the incoming emails check box instead of the email address field. Refer to this documentation for setup instructions and more information: Domeinnamen. Once the domain alias is configured, the email address field will be visible beneath the incoming emails section.

Next, enter the email address to be used in the email field, then click Save. Now that the email address has been entered, emails can be sent to that alias to create new expenses without having to be in the Odoo database.

To submit an expense via email, create a new email and enter the product’s internal reference code (if available) and the amount of the expense in the email subject. Next, attach the receipt to the email. Odoo creates the expense by taking the information in the email subject and combining it with the receipt.

To check an expense product’s internal reference, go to Expenses app ‣ Configuration ‣ Expense Products. If an internal reference is listed on the product, it is visible in this view.

Internal reference numbers are listed in the main Expense Products view.

To add an internal reference on an expense product, click on the product, then click Edit. In edit mode, enter the Internal Reference in the field. Beneath the Internal Reference field, this sentence appears: Use this reference as a subject prefix when submitting by email..

Internal reference numbers are listed in the main Expense Products view.

Notitie

For security purposes, only authenticated employee emails are accepted by Odoo when creating an expense from an email. To confirm an authenticated employee email address, go to the employee card in the Employees app, and refer to the Work Email in the main field.

Create the domain alias by clicking the link.

Example

If submitting an expense via email for a $25.00 meal during a work trip, the email subject would be Ref005 Meal $25.00.

Uitleg:

  • The Internal Reference for the expense product Meals is Ref005

  • The Cost for the expense is $25.00

Create an expense report

When expenses are ready to submit (such as at the end of a business trip, or once a month), an expense report needs to be created. Go to the main Expenses app dashboard, which displays a default My Expenses view, or go to Expenses app ‣ My Expenses ‣ My Expenses to Report.

First, each individual expense for the report must be selected by clicking the check box next to each entry, or quickly select all the expenses in the list by clicking the check box next to Expense Date.

Select the expenses to submit, then create the report.

Once the expenses have been selected, click the Create Report button. The new report appears with all the expenses listed, and the Employee, Paid By, Expense Journal, and Company fields are automatically populated from the individual expenses in the report.

It is recommended to add a short summary for each report to help keep expenses organized. Enter a short description for the expense report (such as Client Trip NYC, or Repairs for Company Car) in the Expense Report Summary field.

Notitie

If all the expenses are listed for the same date, the Expense Report Summary field will be pre-populated with the date for the expenses.

Next, select a Manager from the drop-down menu to assign a manager to review the report.

Enter a short description and select a manager for the report.

If some expenses are not on the report that should be, they can still be added. Click Add a line at the bottom of the Expense tab. Click the check box next to each expense to add, then click Select. The items now appear on the report that was just created.

Add more expenses to the report before submitting.

When all edits have been completed, click Save. Once the expense report is saved, an Expenses smart button appears in the top-right corner, listing the number of expenses on the report. Click the Expenses smart button to view the individual expenses for the report in a list.

An Expenses smart button appears after saving the expense report.

Submit an expense report

When an expense report is completed, the next step is to submit the report to a manager for approval. Reports must be individually submitted, and cannot be submitted in batches. Open the specific report from the list of expense reports (if the report is not already open). To view all expense reports, go to Expenses app ‣ My Expenses ‣ My Reports.

If the list is large, grouping the results by status may be helpful since only reports that are in a Draft mode need to be submitted, reports with an Approved or Submitted status do not.

Submit the report to the manager.

Notitie

The status of each report is shown in the Status column on the far right. If the Status column is not visible, click the ⋮ (additional options) icon at the end of the row, and check the box next to Status.

Click on a report to open it, then click Submit To Manager. After submitting a report, the next step is to wait for the manager to approve it.

Belangrijk

The Approve expenses, Post expenses in accounting, and Reimburse employees sections are only for users with the necessary rights.

Approve expenses

In Odoo, not just anyone can approve expense reports— only users with the necessary rights (or permissions) can. This means that a user must have at least Team Approver rights for the Expenses app. Employees with the necessary rights can review expense reports, and approve or reject them, as well as provide feedback thanks to the integrated communication tool.

To see who has rights to approve, go to the main Settings app and click on Manage Users.

Notitie

If the Settings app is not available, then certain rights are not set on the account. In the Access Rights tab of a user’s card in the Settings app, the Administration section is set to one of three options:

  • None (blank): The user cannot access the Settings app at all.

  • Access Rights: The user can only view the User’s & Companies section of the Settings app.

  • Settings: The user has access to the entire Settings app with no restrictions.

Please refer to this document to learn more about managing users and their access rights.

Click on an individual to view their card, which displays the Access Rights tab in the default view. Scroll down to the Human Resources section. Under Expenses, there are four options:

  • None (blank): A blank field means the user has no rights to view or approve expense reports, and can only view their own.

  • Team Approver: The user can only view and approve expense reports for their own specific team.

  • All Approver: The user can view and approve any expense report.

  • Administrator: The user can view and approve any expense report as well as access the reporting and configuration menus in the Expenses app.

Users who are able to approve expense reports (typically managers) can easily view all expense reports to validate. Go to Expenses app ‣ Expense Reports ‣ Reports to Approve. This view lists all the expense reports that have been submitted but not approved, as noted by the Submitted tag in the status column.

Reports to validate are found on the Reports to Approve page.

Reports can be approved in two ways (individually or several at once) and refused only one way. To approve multiple expense reports at once, remain in the list view. First, select the reports to approve by clicking the check box next to each report, or click the box next to Employee to select all reports in the list. Next, click the Approve Report button. The number of reports that are selected appear next to the Approve Report button, in an X Selected button, with X being the number of reports currently selected.

Approve multiple reports by clicking the checkboxes next to each report.

To approve an individual report, click on a report to go to a detailed view of that report. In this view, several options are presented: Approve, Refuse, or Reset to draft. Click Approve to approve the report.

If Refuse is clicked, a pop-up window appears. Enter a brief explanation for the refusal in the Reason to refuse Expense field, then click Refuse.

Send messages in the chatter.

Team managers can easily view all the expense reports to approve for their team members. While in the Reports to Approve view, click on Filters, then click My Team. This presents all the reports to approve for the manager’s team. Manager’s can easily view all reports for their team by simply clicking on and removing the To Approve filter in the Search… bar, leaving only the My Team filter active.

Select the My Team filter.

Tip

If more information is needed, such as a missing receipt, communication is easy from the chatter. In an individual report, simply click Send Message, then type in a message in the text box that appears, tagging the proper person (if needed), and post it to the chatter by clicking Send. The message is posted in the chatter, and the person tagged will be notified via email of the message, as well as anyone following.

Note that only followers can be tagged in a message. To tag someone who is not following, add them as a follower first. Click the 👤 (person) icon, then click Add Followers, then enter their name in the Recipients field, and finally, click Add Followers.

Send messages in the chatter.

Post expenses in accounting

Once an expense report is approved, the next step is to post the report to the accounting journal. To view all expense reports to post, go to Expenses ‣ Expense Reports ‣ Reports To Post.

View reports to post by clicking on expense reports, then reports to post.

Just like approvals, expense reports can be posted in two ways (individually or several at once). To post multiple expense reports at once, remain in the list view. First, select the reports to post by clicking the check box next to each report, or click the box next to Employee to select all reports in the list. Next, click Post Entries.

Post multiple reports from the Post Entries view.

To post an individual report, click on a report to go to the detailed view of that report. In this view, several options are presented: Post Journal Entries, Report In Next Payslip, Refuse, or Reset to Draft. Click Post Journal Entries to post the report.

If Refuse is clicked, a pop-up window appears. Enter a brief explanation for the refusal in the Reason to refuse Expense field, then click Refuse. Refused reports can be viewed by going to Expenses app ‣ Expense Reports ‣ All Reports. This list shows all reports, including the refused ones.

Notitie

To post expense reports to an accounting journal, the user must have following access rights:

  • Boekhouding: boekhouder of adviseur

  • Declaraties: Manage

Reimburse employees

After an expense report is posted to an accounting journal, the next step is to reimburse the employee. To view all expense reports to pay, go to Expenses ‣ Expense Reports ‣ Reports To Pay.

View reports to pay by clicking on expense reports, then reports to pay.

Just like approvals and posting, expense reports can be paid in two ways (individually or several at once). To pay multiple expense reports at once, remain in the list view. First, select the reports to pay by clicking the check box next to each report, or click the box next to Employee to select all reports in the list. Next, click Register Payment.

Post multiple reports by clicking the checkboxes, clicking the gear, then post the entries.

To pay an individual report, click on a report to go to a detailed view of that report. Click Register Payment to pay the employee.

Uitgaven herfactureren naar klanten

If an expense is to be reimbursed by a customer and not the company, the expense can be automatically charged to the customer. This is done by first referencing the SO the expense should be applied to when creating the expense.

The next steps are the same as if the expense is being reimbursed by the company instead of a customer. The expense or expenses are placed on an expense report, and then the expense report is submitted for approval. Next, managers approve the expense report, and the accounting department post the journal entry.

Finally, once the expense report is posted to a journal, the expense then appears on the SO that was referenced when the expense was first created.

The sales order can then be invoiced, thus invoicing the customer for the expense.

Instellingen

First, specify the invoicing policy for each expense product. Go to Expenses app ‣ Configuration ‣ Expense Products. Click on the expense product to edit, then click Edit. Under the Invoicing section, select the Invoicing Policy and Re-Invoicing Policy by clicking the radio button next to the desired selection.

Invoicing Policy:

  • Ordered quantities: Expense product will only invoice expenses based on the ordered quantity.

  • Delivered quantities: Expense product will only invoice expenses based on the delivered quantity.

Re-Invoicing Policy:

  • No: Expense product will not be re-invoiced.

  • At cost: Expense product will invoice expenses at their real cost.

  • At sales price: Expense product will invoice the price set on the sale order.

Create an expense and expense report

First, when creating a new expense, the correct information needs to be entered in order to re-invoice a customer. Using the drop-down menu, select the sales order the expense will appear on in the Customer to Reinvoice section. Next, select the Analytic Account the expense will be posted to. After the expense(s) is created, the expense report needs to be created and submitted as usual.

Ensure the customer to be invoiced is called out on the expense.

Belangrijk

Selecting a Customer to Reinvoice when creating an expense is critical, since this field is unable to be modified once the expense is added to an expense report.

Validate and post expenses

Only employees with permissions (typically managers or supervisors) can approve expenses. Before approving an expense report, ensure the Analytic Account is set on every expense line of a report. If an Analytic Account is missing, click Edit and select the correct account from the drop-down menu, then click Approve or Refuse.

The accounting department is typically responsible for posting journal entries. Once an expense report is approved, it can then be posted. The SO is only updated after the journal entry is posted, and the expense(s) now appear on the referenced SO.

Invoice expenses

Once the SO has been updated, it is time to invoice the customer. After the expense report has been approved and the journal entry has been posted, the SO can be opened and the expenses can be seen on it. Click anywhere on an expense line, and the details for that individual expense appears in a pop-up. Click on the SO that is listed next to Customer to Reinvoice.

After the expense report is posted to the journal entry, the sales order can be called up by clicking on the sales order number.

The SO appears, and now the expenses are listed in the Order Lines tab.

See the expenses listed on the sales order after clicking into it.

Next, click Create Invoice, and select if the invoice is for a Regular invoice, a Down payment (percentage), or a Down payment (fixed amount) by clicking the radio button next to it. Then, click Create Invoice. The customer has now been invoiced for the expenses.