Odoo Help

0

What devices work with the IoT box of Odoo v12.0

By
Fabrice Henrion (fhe)
on 10/11/18, 8:03 PM 1,440 views

Models? Brands? Protocols?

2

Fabrice Henrion (fhe)

--Fabrice Henrion (fhe)--
6543
| 7 7 9
San Francisco, United States
--Fabrice Henrion (fhe)--

Director Odoo Americas

Fabrice Henrion (fhe)
On 10/11/18, 8:26 PM

The box itself should be a Raspberry Pi 3 B+ (recommended) or higher.

The SDcard should have the following minimum specifications:
- 16GB storage minimum
- Class 10
- UHS-i, U3, (not A1).
We successfully tested the Toshiba EXCERIA M302.

Any device that acts as an external keyboard with a HID interface (ie. keyboard emulation) can be used in the quality steps.
Examples:
- USB foot switch (1 pedal), eg. http://a.co/d/3bRK3Cf
- USB foot switch (3 pedals) [eg. Lemo 1640835]

All USB web cameras (but not IP cameras) are supported. [eg. HAVIT HV-N5086]

Many printer drivers are loaded in the IoTbox. If there is a linux driver for your printer, chances are it will work. This is true for inkjet, laser, label printers, etc...

Only the following caliper models will work:
- Factory5 Sylvac S_Cal EVO BT 810.1506.10, https://www.factory5.tech/en_US/shop/product/013-477-pied-a-coulisse-s-cal-evo-bt-150mm-13444 or,
- Factory5 Sylvac S_Cal EVO BT 810.9516.10, https://www.factory5.tech/en_US/shop/product/013-479-pied-a-coulisse-s-cal-evo-bt-um-150mm-13446


About This Community

This platform is for beginners and experts willing to share their Odoo knowledge. It's not a forum to discuss ideas, but a knowledge base of questions and their answers.

Register

Odoo Training Center

Access to our E-learning platform and experience all Odoo Apps through learning videos, exercises and Quizz.

Test it now

Question tools

5 follower(s)

Stats

Asked: 10/11/18, 8:03 PM
Seen: 1440 times
Last updated: 10/12/18, 1:07 AM