Models? Brands? Protocols?
Odoo is the world's easiest all-in-one management software.
It includes hundreds of business apps:
- CRM
- e-Commerce
- Księgowość
- Zapasy
- PoS
- Projekt
- MRP
To pytanie dostało ostrzeżenie
2
Odpowiedzi
11453
Widoki
The box itself should be a Raspberry Pi 3 B+ (recommended) or higher.
The SDcard should have the following minimum specifications:
- 16GB storage minimum
- Class 10
- UHS-i, U3, (not A1).
We successfully tested the Toshiba EXCERIA M302.
Any device that acts as an external keyboard with a HID interface (ie. keyboard emulation) can be used in the quality steps.
Examples:
- USB foot switch (1 pedal), eg. http://a.co/d/3bRK3Cf
- USB foot switch (3 pedals) [eg. Lemo 1640835]
All USB web cameras (but not IP cameras) are supported. [eg. HAVIT HV-N5086]
Many printer drivers are loaded in the IoTbox. If there is a linux driver for your printer, chances are it will work. This is true for inkjet, laser, label printers, etc...
Only the following caliper models will work:
- Factory5 Sylvac S_Cal EVO BT 810.1506.10, https://www.factory5.tech/en_US/shop/product/013-477-pied-a-coulisse-s-cal-evo-bt-150mm-13444 or,
- Factory5 Sylvac S_Cal EVO BT 810.9516.10, https://www.factory5.tech/en_US/shop/product/013-479-pied-a-coulisse-s-cal-evo-bt-um-150mm-13446
None of the links work
There are 3 links. The Amazon link works. The 2 Factory5 links don't work anymore because the manufacturer disabled those pages. You will have to contact them with the model name to order.
Podoba Ci się ta dyskusja? Dołącz do niej!
Stwórz konto dzisiaj, aby cieszyć się ekskluzywnymi funkcjami i wchodzić w interakcje z naszą wspaniałą społecznością!
Zarejestruj się