Skip to Content
This question has been flagged
reorderingtransfersV13replenish
2 Replies
10922 Views
Avatar
Syver Anmarkrud

We have a main storage area Location 1, and a picking location for Manufacturing, Location 2.
Product A is purchased into Location 1, and a Reordering Rule is set up based on min/max stock level.

Location 2 is replenished from Location 1 with internal transfers, and the internal transfers are created manually when needed. 

However, we would prefer to have a planned internal transfer to be created automatically based on min/max rule in Location 2.

I have experimented with different setups of rules and routes, but i have not been successful in getting this scenario working. Does anybody out there know if this is even possible to accomplish within standard functionality in Odoo 13? Thanks:)

Avatar
Discard
Cayprol

I believe this is can be achieved by default with Odoo13 .

Did you enable Warehouse > Resupply > Manufacture > Pick components and then manufacture (2 steps)

Syver Anmarkrud
Author

Hi Justin Chen, yes I am using the two-step picking process for manufacturing, and this is working fine for replenishing both location 1 and Location 2 from manufacturing orders. I actually have two separate routes to manage this, and it works fine. This allows the products to be picked to a staging area from both locations before production starts.

However, i am trying to achieve reorder point replenishment via internal transfer from location 1 to location 2. I see how the route may be defined, but not hOw to trigger it based on min/max in Location 2.

Bella

have you solved this issue?

Syver Anmarkrud
Author
No, i did not find any standard functionality for this. 
Seems like i would need to develop custom app.
Avatar
bhavik vyas
Best Answer

Here is how it's done.

Create a new Route:


Here is the config for both Rules




Hope this will help!

Avatar
Discard
Brett

Thanks! This was just what I was looking for! I think we have an issue in our implementation, though. Consider three separate cases (My reordering rules are set up as 0 min, 0 max). (1) doesn't work as I expected. (2) and (3) do.

1) I have existing stock of Qty 1 in LOC1 and Qty 0 in LOC2. I create a MO (pulling from LOC2) for Qty 3. I'd expect to get a transfer for 3 and an RFQ for 2. However, I seem to be getting a transfer for 3 and a RFQ for 3. And when I'm finished, I wind up with qty 1 left in LOC1.

2) I have existing stock of Qty 4 in LOC1 and Qty 0 in LOC2. I create a MO (pulling from LOC2) for Qty 3. Here, things work great -- I get a transfer for 3 and I'm off and running. If I complete that MO, my stock is now 1 in LOC1 and 0 in LOC2 as expected.

3) I have existing stock of Qty 0 in LOC1 and Qty 0 in LOC2. I create a MO (pulling from LOC2) for Qty 3. Here, things work great -- I get an RFQ for 3 and a transfer for 3 and I'm off and running. If I complete that MO, my stock goes back to 0 in LOC1 and 0 in LOC2 as expected.

Have you seen this?

Avatar
Cayprol
Best Answer

Hi I just tested the stock behavior of odoo 13 CE.

Setting:

  1. Enable multi-step route, 2-step, picking and manufacture

  2. Create 3 products, A and B route as Buy, C as manufacture

  3. BoM is A + B = C

  4. Reordering rule for A, B, C

  5. Create a Vendor, set such vendor for A, B with qty and price

Steps breakdown:

  1. Create Manufacturing Order - A MO to process in draft state

  2. Mark the MO as todo - WH/PC is created, WH/Stock(Location 1) to WH/Pre-Production(Location 2) for both A & B

  3. Run scheduler - PO created for  A, B  buying from Vendor

  4. Confirm Order - Receipts WH/IN created

  5. Validate WH/IN - WH/Stock(Location 1) has 1A, 1B

  6. Run scheduler - WH/PC shows reserved qty

  7. Validate WH/PC - 1A, 1B are in WH/Pre-Production(Location 2)

  8. Complete the MO - C is in WH/Stock(Location 1)

I believe your question is the auto creation of step 2, which is done by enabling 2-step picking and manufacture. 


Avatar
Discard
Related Posts Replies Views Activity
Default Horizon in Replenish Report - is there a way to change the default value? It keeps resettting after ordering.
replenish
Avatar
0
Jul 25
1200
How to block XSS cross site scripts - Odoo V13
V13
Avatar
0
Feb 22
4719
How can I set Minimum Order value in Point of Sales
V13
Avatar
Avatar
1
Apr 21
2118
Disable field Conditionally in Odoo V13 without create field in Database.
V13
Avatar
0
Apr 21
2929
Liquidity Transfers account?
transfers
Avatar
Avatar
Avatar
3
Nov 20
7032