コンテンツへスキップ
この質問にフラグが付けられました
warehouseinventoryreceiptquickstartroutes
1 返信
5256 ビュー
アバター
Andrea Martinez (amt)

Depending on the product category, I can either process incoming products using a 2-step or 3-step process.

  1. 2-step:
    1. Receive from Vendors -> Input
    2. Input -> Stock
  3. 3-step:
    1. Receive from Vendors -> Input
    2. Input -> Quality Control
    3. Quality Control -> Stock

How can I set this up in Odoo?


アバター
破棄
Sheldon Atherton

Hi can this be altered so that some products are received in 3 steps and some products are received in 1 step?

Andrea Martinez (amt)
著作者

Hi Sheldon,

The operation type is the key to having multiple receipt processes within one purchase order; the destination location must be the same. In the example above, both routes use Input first.

You can have 1-step and 3-step receipts as long as these are used in separate purchase orders, since:
1) The one-step process receives into Stock
2) The tree-step process received into Input.

Sheldon Atherton

Hi Andrea,
Thank you for coming back to me. So I can have some product that will go through the Vendor to Input, then Input to Quality Control and then Quality Control to Stock.
Then I can have another product that will go Vendor to Stock?

I have tried a configuration like this and cannot seem to get it to work.

I always end up with some product in 3 step step (Input-QC-Stock) and the others in (Input-Stock)

アバター
Andrea Martinez (amt)
著作者 最善の回答

For the three-step route, follow the steps below.

  1. In the Inventory settings, enable multi-step routes.
  2. Go to Inventory > Configuration > Warehouse and enable the three-step receipt route on the warehouse.
  3. Create two new operation types (not a must-do, but recommended for better clarity on what needs to be done)
    1. Input to Quality
    2. Quality to Stock
  5. Open the three-step route and modify the route so that it is applied at the product category level.
  6. Modify the rules on the route so that each rule uses one of the operation types created in step 3.

Follow the next steps to create the 2-step route:

  1. Create a new operation type for Input to Stock
  2. Create a new route applied at the product category level using the rule shown below.

Once both routes have been created, update the product categories with their respective routes.

アバター
破棄
関連投稿 返信 ビュー 活動
Making automatic expeditions and receptions between two warehouses 解決済
inventory quickstart routes
アバター
1
9月 22
3422
How to trigger a route depending on the customer ?
inventory quickstart routes
アバター
1
2月 22
2980
How to configure multi levels of BoMs at the subcontractor's location 解決済
manufacturing inventory quickstart routes
アバター
アバター
2
10月 25
5760
How to have inter company transfers and quality controls after receiving the products more automated? 解決済
inventory quickstart routes qualitycontrol
アバター
2
2月 24
2680
How to automatically create a purchase order per sales order? 解決済
inventory quickstart routes mto v15
アバター
アバター
2
4月 25
23951