Skip to Content
เมนู
คุณต้องลงทะเบียนเพื่อโต้ตอบกับคอมมูนิตี้
คำถามนี้ถูกตั้งค่าสถานะ
3 ตอบกลับ
8134 มุมมอง

Hi;

How can I connect datalogic magellan 8400 scale and scanner to odoo pos box? Can you help me, please?



อวตาร
ละทิ้ง
คำตอบที่ดีที่สุด

Hello,

You can connect other with our modified POSBox, dolar protocol and Epelsa Euroscale.

Greetings

อวตาร
ละทิ้ง
ผู้เขียน คำตอบที่ดีที่สุด

Hello Parth;

2.) ADAM Equipment Protocol
   baudrate=4800,   bytesize=EIGHTBITS,   stopbits=STOPBITS_ONE,   parity=PARITY_NONE,
 weightCommand='P',   zeroCommand='Z',   tareCommand='T',.

This works for scale, but not the scanner. It lists the scale as Toledo 8217. When you attach scanner it stops working a calls it Adam.

Can you help me, please?


อวตาร
ละทิ้ง
คำตอบที่ดีที่สุด

Hello INANC ELITOK,
Currently Odoo is supporting these Scale Company Protocols:

1. Toledo 8217 Protocol
2. ADAM Equipment Protocol
1.) Toledo 8217 Protocol
   baudrate=9600,   bytesize=SEVENBITS,   stopbits=STOPBITS_ONE,   parity=PARITY_EVEN,   weightCommand='W',   zeroCommand='Z',   tareCommand='T',   clearCommand='C',
2.) ADAM Equipment Protocol
   baudrate=4800,   bytesize=EIGHTBITS,   stopbits=STOPBITS_ONE,   parity=PARITY_NONE,
 weightCommand='P',   zeroCommand='Z',   tareCommand='T',.

So, You can only connect the scales which is having similar Protocol base. Otherwise, you need to get POSBOX Image modified according to your Scale. This was in regards of scales but for the scanner part, it should work without any detail configuration.

Thanks!
อวตาร
ละทิ้ง
Related Posts ตอบกลับ มุมมอง กิจกรรม
1
ก.ย. 21
3275
0
ก.ค. 18
2327
0
มี.ค. 18
3089
0
ส.ค. 18
7598
3
เม.ย. 17
6166