Zum Inhalt springen
Menü
Sie müssen registriert sein, um mit der Community zu interagieren.
Diese Frage wurde gekennzeichnet
1 Antworten
4056 Ansichten

I have plugged a brand new posbox into my router via data cable (yellow and green lights are solid on either side of the data port on the posbox).

I have plugged a working TM-20 Epson printer into the posbox (via usb) and left it for hours... no status receipt ever prints as described in the installation guide.

I can see posbox as a wifi option.

I have tried unplugging and turning off everything and it makes no difference.

Any ideas??

Avatar
Verwerfen
Beste Antwort

make sure the USB cable / data cable is plugged before starting up the posbox , if everything goes well the you will receive the ip / mac address if nothing happens then you can connect the posbox to monitor and log in to the OS default username : pi default password : raspberry then type ifconfig and see the ip address (you can make it fixed ip address) then from your pc browser go to ip:8069 you should see the posbox configuration page and see all attached devices / status for each one .

Avatar
Verwerfen
Verknüpfte Beiträge Antworten Ansichten Aktivität
1
Apr. 15
3992
4
März 15
6756
0
März 15
4722
1
Aug. 24
7631
0
Aug. 24
4514