Ir al contenido
Se marcó esta pregunta
12 Respuestas
13632 Vistas
Avatar
Russell

Hi all,

We are trying to boot POSBOX v13 or v12 on the Raspberry PI 3, so we can print receipt tickets originating from the Odoo POS application which runs on a separate 64-bit Ubuntu server.  Receipt printer is connected through USB.


What we did:

1) download latest posbox image from: http://nightly.odoo.com/trunk/posbox/

2) unzip the downloaded image on windows

3) format the SD card using diskpart

4) use Win32DiskImager to write the img to an 8 GB SD card

5) ensure the printer is powered on, and connected to the RPI 3

6) insert the SD card in the RPI 3 and power on the RPI 3


What happened?

1) The RPI 3 does not boot. 


Testing alternatives:

1) When using images like for example Noobs, Raspbian the RPI 3 worked like a charm on all the different SD cards.


Questions:

1) Can POSBOX be installed or run on a RPI 3?  

2) Is it because of 32bit or 64bit compatibility, As the older models were 32bit or the processors ARM are different from the       older models?

Avatar
Descartar
Vu Nguyen

Version posbox v14 is available: http://nightly.odoo.com/trunk/posbox/posbox_image_v14.zip

OdooBot
May I know what is the default login for the posbox v14?

As I am unable to login withe the default 

username: pi
password: admin

it says incorrect login.

Please advise. Thank you.

Best Regards,
Russell

On Sun, Apr 24, 2016 at 9:57 AM, Ralph Cavallaro <ralph@newreachconsulting.com> wrote:

A new answer on Unable to boot POSBOX image installation on the Raspberry Pi 3 has been posted. Click here to access the post :

See post

--
Ralph Cavallaro
Sent by Odoo S.A. using Odoo

Vu Nguyen

You can try username: pi password: raspberry

OdooBot
Did you try the wireless on the v14. As I go to the wireless setting there are no SSID detected at all. 

On Wed, Apr 27, 2016 at 12:15 PM, Anh Vu <vuna2004@gmail.com> wrote:

You can try username: pi password: raspberry

--
Anh Vu
Sent by Odoo S.A. using Odoo

Vu Nguyen

I cannot use the UI to connect wifi (I dont know why, maybe the image doesnot support UI). I tried this one: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md and run this command after finishing the configuration: sudo /sbin/wpa_supplicant -P /var/run/wpa_supplicant.wlan0.pid -i wlan0 \ -D nl80211,wext -c /etc/wpa_supplicant/wpa_supplicant.conf Everything is OK. BTW, when I reboot RPI , it also reset the configuration in the wpa_supplicant.conf. I have tried to find another way. Can you try and give me your feedback ?

OdooBot
I have tried the way you suggest but it says:

wlan    Interface doesn't support scanning.

So i went to the UI page for the posbox ipaddress is displays an SSID. I have attached the screenshots

On Wed, May 4, 2016 at 4:17 PM, Anh Vu <vuna2004@gmail.com> wrote:

I cannot use the UI to connect wifi (I dont know why, maybe the image doesnot support UI). I tried this one: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md and run this command after finishing the configuration: sudo /sbin/wpa_supplicant -P /var/run/wpa_supplicant.wlan0.pid -i wlan0 \ -D nl80211,wext -c /etc/wpa_supplicant/wpa_supplicant.conf Everything is OK. BTW, when I reboot RPI , it also reset the configuration in the wpa_supplicant.conf. I have tried to find another way. Can you try and give me your feedback ?

--
Anh Vu
Sent by Odoo S.A. using Odoo

Vu Nguyen

ah I see, I have same problem, can not select any ESSID.

Avatar
Laurent Wülser
Mejor respuesta

Hi,

Does someone else have a img/iso of POSBOX working with printer (Epson)  on Raspberry Pi 3 (RPI3) ? With v16, printer/usb not visible in the USB device list. And Wifi not working too (no ssid available).

Thanks.

Avatar
Descartar
Avatar
Chidozie Kingsley Okonkwo
Mejor respuesta

Were you able to boot posbox image on raspberry pi 3 ?

If yes, then i can give you a detailed description on how i did it on raspberry pi 2

Avatar
Descartar
Avatar
Ralph Cavallaro
Mejor respuesta

Does the latest POSBox v14 image work for RPi 3?

Avatar
Descartar
Avatar
Russell
Autor Mejor respuesta

Found another way but its not a POSBOX image.

We will try this on the Pi 3 and update here. Anybody else want to try here is the link below:

http://plaobox.blogspot.sg/2015/03/i-wanted-to-see-if-littleraspberrypi.html?m=1


Hope to get more replies and point of view. As I think I'm not the only 1 trying to implement a POS system on the latest raspberry Pi 3. As older model especially the raspberry Pi 1 B+ was working. Unfortunately that model is not available in production or it is end of life.

Avatar
Descartar
Avatar
Vu Nguyen
Mejor respuesta

Yes, I have as the same as problem. Hope we can have another posbox image. I had tried to build the new one but I was stuck.

- https://github.com/odoo/odoo/tree/8.0/addons/point_of_sale/tools/posbox

- file posbox_download_images.sh -> seems repository: https://github.com/dhruvvyas90/qemu-rpi-kernel/raw/master/kernel-qemu had been change.
- He updated some new version of kenel here https://github.com/dhruvvyas90/qemu-rpi-kernel/


Avatar
Descartar