Ir al contenido
Se marcó esta pregunta
mrpmobomv14
3 Respuestas
10739 Vistas
Avatar
Craig Steffen

I tried creating a simple BOM with different materials that were to be consumed in different operations and ran an MO. I completed some of the work orders but my on-hand inventory was never updated for the materials consumed in those operations. I had to complete the entire MO and "mark as done" in order for on-hand inventory to be updated. 

I am assuming that Odoo is configurable so that the materials designated to be consumed in an operation actually post through as consumed to inventory (reduce the on-hand quantity) when the operations are completed. It doesn't seem that the MO would have to be entirely completed for this to take place. Is this a settings issue on my end? What do I need to do?

Avatar
Descartar
WMSSoft Pty Ltd Sales

we are having the same problem.  in fact no matter what work order you use when you specify on the top of the work order that you have made 1 out of 5 this seems to be on any WO in the MO and relates to making actual finished goods.  How can this be , surely you only make the finished good after the last operation?

Harri Matero

Same issue on Odoo-14e

Even if Bom list shows component has been consumed. No wh moving made. After MO has been mark done, components consumed from WH
Bug?



Avatar
Daniele Lucarelli
Mejor respuesta

I don't know if I'm stepping in too late but...

You have to enable multi-step routes in the inventory module configuration. Then in each warehouse you can set routes for shipments and resupply. Multi-step manufacture makes the stock moves you are looking for.

In 1 step production components are moved from WH/Stock to Virtual Locations/Production and as you found out there's no real stock move until MO is closed.

In 2 steps production components are moved from WH/Stock to WH/Preproduction before production

In 3 steps production a WH/Post Production location is added for the finished goods after production and before WH/Stock.

Beware, 2 and 3 steps production stock moves have to be validated manually. You can manage them from within the MO itself or from the Inventory app.


Avatar
Descartar
Avatar
jbarnhart@minespress.com
Mejor respuesta

I came to the conclusion that "consumed in operation" just means that is where the user records what they used. It still doesn't get removed from inventory until the MO is closed. 

The same happens if you aren't using flexible consumption. It doesn't remove it from inventory until the MO is closed, you just don't get to tell the system exactly how much you used. It assumes you used exactly what the BoM indicated.

Avatar
Descartar
Avatar
Chris TRINGHAM
Mejor respuesta

It should work if you define the components as being consumed in the operation:


Avatar
Descartar
Craig Steffen
Autor

Posting this in the correct place - sorry about that (I'm new to the forum)

I have tried this and it still doesn't work for me. Even when I assign operations for consumption to specific materials on the BOM it doesn't relieve the inventory when the respective operation is completed. When the MO is confirmed, inventory correctly shows quantity on hand and the forecasted quantity (based on the BOM materials). The only way I have been able to update inventory quantity on hand is to Mark as Done MO.

Even when I complete an operation and then MANUALLY consume the materials it doesn't update the inventory quantity on hand. When I completed the operation where this material was set to consume, I clicked on the "more options" link to the right and it opened up the Detailed Operations window. In this window I even manually typed in the Done quantity. After doing this the MO even shows that material is consumed. However, it still doesn't update the inventory quantity on hand but still shows the forecasted decreased quantity.

What is the trigger point for updating the quantity on hand in the Inventory module?

I'm sure this must be some sort of settings issue on my end or something isn't set up correctly. Any help would be greatly appreciated!

WMSSoft Pty Ltd Sales

further to this on the work order screen it usually has x of y to enter how many have been made but this appears on all WO's in an MO. Surely this only appear on the last operation when the finished good is finally made?

Publicaciones relacionadas Respuestas Vistas Actividad
Shared BOM Operations w/out Duplicates
mrp bom operations v14
Avatar
Avatar
1
sept 21
3194
Adding Operations to BOM - Version 14 Resuelto
mrp bom v14 Operations
Avatar
Avatar
Avatar
2
may 21
6934
Subcontracting Product with multiple BoM
mrp bom
Avatar
0
oct 25
1635
How to remove internal reference from product bom list view
python xml mrp bom v14
Avatar
Avatar
1
abr 22
3118
Sale order line to MO
mrp v14
Avatar
Avatar
Avatar
2
oct 21
5078