Hi, Carlos

You are getting this issue because Odoo is not able to locate your conf file. So in order to locate your conf file while running your Odoo there have multiple ways. Like

• If you are running your Odoo directly from bin file then you need to pass your config file along with then bin file using "-c" or "--config" like below,
  

• • ../odoo-bin -c config_file_path

  • e.g: Path of your config file is /etc/odoo/odoo.conf
    
    

  • Then you can you command like,

  • • ../odoo-bin -c /etc/odoo/odoo.conf  OR ../odoo-bin --config /etc/odoo/odoo.conf

• Else you can achieve the same by creating a shell script file.
  
  

• • You can take help from the file,Script File
    
    

  • Or you can  refer to the Odoo Debian file.
    
    

  • Inside this file you can update your config file path inside "CONFIGFILE" attribute.

  • • CONFIGFILE="/etc/odoo-server.conf"

  • Then you can you simply start/restart your shell script file using below command.
    

  • • Script_FIle_Path start/restart

    • e.g: Path of script file is /etc/init.d/odoo-server then you can run command like below,

    • • /etc/init.d/odoo-server restart 

Hope above points will help you to achieve this part. In case of any confusion feel free to ask.

Thanks,

Ashish Singh (Team Lead)

Webkul Software Private Limited

Mira el siguiente enlace:

http://poncesoft.blogspot.com.es/2014/06/utilizar-un-servidor-independiente.html

Espero que te baya bien, recibe un cordial saludo.

Try using xmlrpc