Raspberry pi posbox static IP

Question

Good day all
I am using posbox 13 on a raspberry pi.  I downloaded the imagine and loaded it and it works great except that I can't set a static ip address on it. When I run ifconfig initially there was no eth01 listed although it was working over lan.
Then after running many commands from a support article I now see it in ifconfig.  However no matter what I do to try set the address as static every time the router (and the device giving out dhcp leases) restarts the posbox gets a new ip address

Taher Giyori · Accepted Answer

You can set the static IP from router itself (for this MAC Address).

William · Answer

In case anyone needs it here the link:
https://odootips.com/ip-estática-en-posbox-8843a763216
Here an extract:
sudo ssh into raspberry (you can look the ip if you attach a monitor to it), then execute this:
sudo mount -o rw,remount /
sudo mount -o remount,rw /root_bypass_ramdisks
sudo nano /root_bypass_ramdisks/etc/dhcpcd.conf
ADD to the file in the last lines:
interface eth0 <--- this is the name of your card, and here the static ip is .150
static ip_address=192.168.1.150/24
static routes=192.1

Chookiat · Answer

If your RPi get the IP from the DHCP, on your router/DHCP may have a feature to fix the IP to MAC address.

Dale · Answer

Thanks guys

That was simple enough!

관련 게시물	답글	화면
ePoS Printer 해결 완료 pos printer IP	2 6월 24	1826
Reading Weight on the POS Box pos odoo10 Posbox	3 12월 22	5775
Connect HPRT TP805L printer with IotBox pos printer Posbox	0 11월 19	3132
Print POS session to posbox printer pos printer Posbox	0 2월 18	2807
Odoo PosBox pos retailer odoo Posbox	1 10월 19	10290

신고된 질문입니다

토론이 재미있으신가요? 직접 참여해보세요!