Přejít na obsah
Menu
You need to be registered to interact with the community.
This question has been flagged
4 Odpovědi
10303 Zobrazení

Good day all

I am using posbox 13 on a raspberry pi.  I downloaded the imagine and loaded it and it works great except that I can't set a static ip address on it. When I run ifconfig initially there was no eth01 listed although it was working over lan.  

Then after running many commands from a support article I now see it in ifconfig.  However no matter what I do to try set the address as static every time the router (and the device giving out dhcp leases) restarts the posbox gets a new ip address 


This is causing massive problems 


Please help! 


Thanks 

Avatar
Zrušit
Nejlepší odpověď

You can set the static IP from router itself (for this MAC Address).

Avatar
Zrušit
Nejlepší odpověď

In case anyone needs it here the link:

https://odootips.com/ip-estática-en-posbox-8843a763216

Here an extract:

sudo ssh into raspberry (you can look the ip if you attach a monitor to it), then execute this:

sudo mount -o rw,remount /
sudo mount -o remount,rw /root_bypass_ramdisks
sudo nano /root_bypass_ramdisks/etc/dhcpcd.conf
ADD to the file in the last lines:

interface eth0 <--- this is the name of your card, and here the static ip is .150
static ip_address=192.168.1.150/24
static routes=192.168.1.1
static domain_name_servers=192.168.1.150

after you save the changes, reboot and done.

Avatar
Zrušit

Should be 'static routers' instead of 'static routes'

Nejlepší odpověď

If your RPi get the IP from the DHCP, on your router/DHCP may have a feature to fix the IP to MAC address.

Avatar
Zrušit
Autor Nejlepší odpověď

Thanks guys


That was simple enough!

Avatar
Zrušit
Related Posts Odpovědi Zobrazení Aktivita
ePoS Printer Vyřešeno
2
čvn 24
1760
3
pro 22
5728
0
lis 19
3078
0
úno 18
2772
1
říj 19
10198