Odoo is the world's easiest all-in-one management software.
It includes hundreds of business apps:

CRM
e-Commerce
Akuntansi
Inventaris
PoS
Project
MRP

All apps

Semua Post Orang Lencana-Lencana

Label (Lihat semua)

odoo accounting v14 pos v15

Mengenai forum ini

Help

ERROR: Can't roll back Pillow; was not uninstalled

installation Odoo13.0 pillow ubuntu20.04

1 Balas

19245 Tampilan

Gopakumar N G

I was trying to install Odoo 13 as source installation on Ubuntu 20.04 and installing the requirements.txt file using pip3 results in the following error.

Building wheels for collected packages: Pillow, psycopg2
  Building wheel for Pillow (setup.py) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-41u8f0do
       cwd: /tmp/pip-install-05trsp81/Pillow/
  Complete output (174 lines):
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.8
  creating build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/__init__.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageMath.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/TarIO.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImagePalette.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageDraw2.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/_util.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImagePath.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageMorph.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/FtexImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/Image.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/_version.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/FontFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GifImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PngImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/TiffTags.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageQt.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/_tkinter_finder.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/MicImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/_binary.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageCms.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/CurImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/features.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageGrab.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PcfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageOps.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/OleFileIO.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageColor.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ContainerIO.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/DdsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/FliImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageFont.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PdfParser.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageShow.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PyAccess.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/WalImageFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageChops.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ExifTags.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/JpegPresets.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageStat.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageSequence.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/BdfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageDraw.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageWin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/MspImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageMode.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageEnhance.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PSDraw.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GdImageFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GimpGradientFile.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageTransform.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/BlpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageFilter.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/ImageTk.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  copying src/PIL/SunImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
  running egg_info
  writing src/Pillow.egg-info/PKG-INFO
  writing dependency_links to src/Pillow.egg-info/dependency_links.txt
  writing top-level names to src/Pillow.egg-info/top_level.txt
  reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
  reading manifest template 'MANIFEST.in'
  warning: no files found matching '*.c'
  warning: no files found matching '*.h'
  warning: no files found matching '*.sh'
  no previously-included directories found matching 'docs/_static'
  warning: no previously-included files found matching '.appveyor.yml'
  warning: no previously-included files found matching '.coveragerc'
  warning: no previously-included files found matching '.codecov.yml'
  warning: no previously-included files found matching '.editorconfig'
  warning: no previously-included files found matching '.landscape.yaml'
  warning: no previously-included files found matching '.readthedocs.yml'
  warning: no previously-included files found matching '.travis'
  warning: no previously-included files found matching '.travis/*'
  warning: no previously-included files found matching 'tox.ini'
  warning: no previously-included files matching '.git*' found anywhere in distribution
  warning: no previously-included files matching '*.pyc' found anywhere in distribution
  warning: no previously-included files matching '*.so' found anywhere in distribution
  writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
  running build_ext
  
  
  The headers or library files could not be found for jpeg,
  a required dependency when compiling Pillow from source.
  
  Please see the install instructions at:
     https://pillow.readthedocs.io/en/latest/installation.html
  
  Traceback (most recent call last):
    File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 765, in <module>
      setup(name=NAME,
    File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 144, in setup
      return distutils.core.setup(**attrs)
    File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
      dist.run_commands()
    File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
      self.run_command(cmd)
    File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 223, in run
      self.run_command('build')
    File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
      self.run_command(cmd_name)
    File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/lib/python3.8/distutils/command/build_ext.py", line 340, in run
      self.build_extensions()
    File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 612, in build_extensions
      raise RequiredDependencyException(f)
  __main__.RequiredDependencyException: jpeg
  
  During handling of the above exception, another exception occurred:
  
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 812, in <module>
      raise RequiredDependencyException(msg)
  __main__.RequiredDependencyException:
  
  The headers or library files could not be found for jpeg,
  a required dependency when compiling Pillow from source.
  
  Please see the install instructions at:
     https://pillow.readthedocs.io/en/latest/installation.html
  
  
  ----------------------------------------
  ERROR: Failed building wheel for Pillow
  Running setup.py clean for Pillow
  Building wheel for psycopg2 (setup.py) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/psycopg2/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/psycopg2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-ikueji9i
       cwd: /tmp/pip-install-05trsp81/psycopg2/
  Complete output (40 lines):
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.8
  creating build/lib.linux-x86_64-3.8/psycopg2
  copying lib/__init__.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/extensions.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/errors.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/pool.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/compat.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/_range.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/_ipaddress.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/_lru_cache.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/tz.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/_json.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/sql.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/extras.py -> build/lib.linux-x86_64-3.8/psycopg2
  copying lib/errorcodes.py -> build/lib.linux-x86_64-3.8/psycopg2
  running build_ext
  building 'psycopg2._psycopg' extension
  creating build/temp.linux-x86_64-3.8
  creating build/temp.linux-x86_64-3.8/psycopg
  x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSYCOPG_VERSION=2.8.3 (dt dec pq3 ext lo64) -DPG_VERSION_NUM=120002 -DHAVE_LO64=1 -I/usr/include/python3.8 -I. -I/usr/include/postgresql -I/usr/include/postgresql/12/server -c psycopg/psycopgmodule.c -o build/temp.linux-x86_64-3.8/psycopg/psycopgmodule.o -Wdeclaration-after-statement
  In file included from psycopg/psycopgmodule.c:27:
  ./psycopg/psycopg.h:35:10: fatal error: libpq-fe.h: No such file or directory
     35 | #include <libpq-fe.h>
        |          ^~~~~~~~~~~~
  compilation terminated.
  
  It appears you are missing some prerequisite to build the package from source.
  
  You may install a binary package by installing 'psycopg2-binary' from PyPI.
  If you want to install psycopg2 from source, please install the packages
  required for the build and try again.
  
  For further information please check the 'doc/src/install.rst' file (also at
  <http://initd.org/psycopg/docs/install.html>).
  
  error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
  ----------------------------------------
  ERROR: Failed building wheel for psycopg2
  Running setup.py clean for psycopg2
Failed to build Pillow psycopg2
Installing collected packages: Pillow, polib, psutil, psycopg2, pyparsing, pydot, pyasn1, pyasn1-modules, python-ldap, PyPDF2, pyserial, pyusb, qrcode, reportlab, cached-property, defusedxml, isodate, requests-toolbelt, appdirs, attrs, zeep, python-stdnum, vatnumber, vobject, Werkzeug, XlsxWriter, xlwt, xlrd
  Attempting uninstall: Pillow
    Found existing installation: Pillow 7.0.0
    Not uninstalling pillow at /usr/lib/python3/dist-packages, outside environment /usr
    Can't uninstall 'Pillow'. No files were found to uninstall.
    Running setup.py install for Pillow ... error
    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpw95zju/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/Pillow
         cwd: /tmp/pip-install-05trsp81/Pillow/
    Complete output (176 lines):
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-3.8
    creating build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/__init__.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageMath.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/TarIO.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImagePalette.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageDraw2.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/_util.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImagePath.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageMorph.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/FtexImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/Image.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/_version.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/FontFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GifImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PngImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/TiffTags.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageQt.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/_tkinter_finder.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/MicImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/_binary.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageCms.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/CurImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/features.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageGrab.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PcfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageOps.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/OleFileIO.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageColor.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ContainerIO.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/DdsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/FliImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageFont.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PdfParser.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageShow.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PyAccess.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/WalImageFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageChops.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ExifTags.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/JpegPresets.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageStat.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageSequence.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/BdfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageDraw.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageWin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/MspImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageMode.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageEnhance.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PSDraw.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GdImageFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GimpGradientFile.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageTransform.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/BlpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageFilter.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/ImageTk.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    copying src/PIL/SunImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
    running egg_info
    writing src/Pillow.egg-info/PKG-INFO
    writing dependency_links to src/Pillow.egg-info/dependency_links.txt
    writing top-level names to src/Pillow.egg-info/top_level.txt
    reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
    reading manifest template 'MANIFEST.in'
    warning: no files found matching '*.c'
    warning: no files found matching '*.h'
    warning: no files found matching '*.sh'
    no previously-included directories found matching 'docs/_static'
    warning: no previously-included files found matching '.appveyor.yml'
    warning: no previously-included files found matching '.coveragerc'
    warning: no previously-included files found matching '.codecov.yml'
    warning: no previously-included files found matching '.editorconfig'
    warning: no previously-included files found matching '.landscape.yaml'
    warning: no previously-included files found matching '.readthedocs.yml'
    warning: no previously-included files found matching '.travis'
    warning: no previously-included files found matching '.travis/*'
    warning: no previously-included files found matching 'tox.ini'
    warning: no previously-included files matching '.git*' found anywhere in distribution
    warning: no previously-included files matching '*.pyc' found anywhere in distribution
    warning: no previously-included files matching '*.so' found anywhere in distribution
    writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
    running build_ext
    
    
    The headers or library files could not be found for jpeg,
    a required dependency when compiling Pillow from source.
    
    Please see the install instructions at:
       https://pillow.readthedocs.io/en/latest/installation.html
    
    Traceback (most recent call last):
      File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 765, in <module>
        setup(name=NAME,
      File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 144, in setup
        return distutils.core.setup(**attrs)
      File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
        dist.run_commands()
      File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
        self.run_command(cmd)
      File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
        return orig.install.run(self)
      File "/usr/lib/python3.8/distutils/command/install.py", line 589, in run
        self.run_command('build')
      File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
        self.run_command(cmd_name)
      File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/usr/lib/python3.8/distutils/command/build_ext.py", line 340, in run
        self.build_extensions()
      File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 612, in build_extensions
        raise RequiredDependencyException(f)
    __main__.RequiredDependencyException: jpeg
    
    During handling of the above exception, another exception occurred:
    
    Traceback (most recent call last):
      File "<string>", line 1, in <module>
      File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 812, in <module>
        raise RequiredDependencyException(msg)
    __main__.RequiredDependencyException:
    
    The headers or library files could not be found for jpeg,
    a required dependency when compiling Pillow from source.
    
    Please see the install instructions at:
       https://pillow.readthedocs.io/en/latest/installation.html
    
    
    ----------------------------------------
  ERROR: Can't roll back Pillow; was not uninstalled
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpw95zju/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/Pillow Check the logs for full command output.

Saasvaap Techies Pvt Ltd

Jawaban Terbai

Before installing the dependencies in requirements.txt file, run the following command.

sudo apt-get install python-dev python3-dev libxml2-dev libxslt1-dev zlib1g-dev libsasl2-dev libldap2-dev build-essential libssl-dev libffi-dev libmysqlclient-dev libjpeg-dev libpq-dev libjpeg8-dev liblcms2-dev libblas-dev libatlas-base-dev

Menikmati diskusi? Jangan hanya membaca, ikuti!

Buat akun sekarang untuk menikmati fitur eksklufi dan agar terlibat dengan komunitas kami!

Daftar

Post Terkait	Replies	Tampilan
odoo 14 in ubuntu 20 installation ubuntu20.04	0 Jan 22	3317
Installing Modules Give a Error installation modules Odoo13.0	0 Feb 22	2882
Migrate from CentOS GIT to Ubuntu 20.04 DEB Packages - missing Filestore filestore Odoo13.0 ubuntu20.04	2 Sep 20	3530
Odoo doesn't work after upgrading ubuntu from 18.04 to 20.04 odoo Odoo13.0 ubuntu18.04 ubuntu20.04	1 Apr 23	4107
Trying to open Odoo but receiving apache page Diselesaikan installation error apache2 Odoo13.0	2 Okt 21	3751

Pertanyaan ini telah diberikan tanda

Menikmati diskusi? Jangan hanya membaca, ikuti!