Přejít na obsah
Menu
You need to be registered to interact with the community.
This question has been flagged
2 Odpovědi
6370 Zobrazení

We give part numbers to our assembly instruction manuals so that we can keep track of the current revision, add them to BoMs, etc.  However, we don't want to keep track of inventory levels for these items.  We just want to have the part number for the correct manual be included on the BoM for an item, and only one (1) manual should be included with a kit of parts for a manufacturing order, regardless of the quantity of items to be assembled.  For example, if we have two manufacturing orders open for ThingA, with quantities of 50 and 100, we'd still include only one manual with each order.  How should this type of arrangement be set up in OpenERP?

Avatar
Zrušit
Nejlepší odpověď

Setting as a consumable still will track inventory but will not trigger any procurment (Make to Order, Make to Stock) etc. So you could use mrp_byproduct and add the manual as fixed qty byproduct of 1 for each MO. You would need to add the byproduct to the MO order report. But it would work.

If you do not want to see any inventory you could change the type to service, but you may want to make sure you have manuals on hand, but maybe not.

Avatar
Zrušit
Autor

Setting the type to "service" seems to work. Now to get it added to the printed BoM...

Nejlepší odpověď

Setting your product with the type "Consumable" should do it

Avatar
Zrušit
Autor

I created a couple of fake parts to test with. "NON-TEST" is set to "consumable", and is listed as a component on the BoM for "FOO" at 1 per assembly. When I create a manufacturing order for 10 "FOOs", the system uses 10 "NON-TESTs" and shows a negative on-hand quantity. :(

Related Posts Odpovědi Zobrazení Aktivita
3
čvn 24
1641
2
bře 24
1898
0
čvn 20
2972
1
bře 15
4283
0
čvc 24
1973