Přejít na obsah
You need to be registered to interact with the community.
All Posts Lidé Odznaky
Štítky (View all)
odoo accounting v14 pos v15
O tomto fóru
This question has been flagged
manufacturinginventoryrulesroutes
2 Odpovědi
2160 Zobrazení
Avatar
Matt Walker

Suggestions on a better way to structure our manufacturing welcome; but...

We have an inventory location on our production floor that hold physical "kits" for our various products. E.g. each "kit" contains a "small" amounts of screws/washers/standoffs needed to build that product. And then when we're building the product we take the kit to any manufacturing workbench.

We also hold bulk inventory in our inventory room, and we replenish the kits as needed.

I'd like to set up rules such that (for example a screw)

  1. We receive bulk screws (thousands) into our inventory room.
  2. We transfer small amounts (hundreds) into the product floor kits (of which there are multiple places that could hold the same screw, but right now only one kit per product.)
  3. When we manufacture a product, we would pull from the product specific kit

The first one is easy to configure in the restocking rules. The second one we can do by hand for now.

It's the third one that has me scratching my head. Can we configure Odoo to pull from specific locations from a product manufacturing order automatically? (e.g. if we're building a Gizmo that it pulls a screw from "WH/Production/Gizmo Kit"; and if we're building a Gadget, that it would pull the same screw from "WH/Production/Gadget Kit".)

Avatar
Zrušit
Avatar
Jaideep
Nejlepší odpověď

A suggestion could be to have 2step manufacturing, that would mean that components are picked from pre-production location followed by main stock location.

Product specific KIT location can be child location of Pre-production location.

The assumption is that the KIT is also a component on the BoM

However this would require enabling multi-location and validation of pickings.


Avatar
Zrušit
Avatar
Matt Walker
Autor Nejlepší odpověď

FWIW -- we're currently using the "Nearest Location" pull policy in the warehouse and then I have a "!Production Kits" location that will be pulled from first. But that just tells me we have material on the floor. There may also be some other repercussions from having this policy at the top level location that I haven't yet discovered.

Avatar
Zrušit
Lars Aam

To manage this, I think 'Gizmo Kit' and 'Gadget Kit' must be two different products. The you will see anyway how many kit you have of each type. You can also dedicate the locations for each of them. If the kits are all the same products, you will not be able to control what qty you have of the different kit types, nor the picking from specific locations.

Related Posts Odpovědi Zobrazení Aktivita
Rules and routes - how to set up "Take from inventory, otherwise manufacture"
inventory rules routes
Avatar
Avatar
2
říj 25
12947
Routes and rules not working in manufacturing setup
inventory rules routes
Avatar
Avatar
Avatar
2
zář 23
9384
Inventory: Confusion about Creating a 4 step Delivery Route Vyřešeno
inventory rules routes
Avatar
1
čvn 25
3132
How to configure multi levels of BoMs at the subcontractor's location Vyřešeno
manufacturing inventory quickstart routes
Avatar
Avatar
2
říj 25
5744
About Manufacturing
manufacturing picking rules routes
Avatar
Avatar
1
úno 24
2174