Skip to Content
Musisz się zarejestrować, aby móc wchodzić w interakcje z tą społecznością.
Wszystkie posty Osoby Odznaki
Tagi (Zobacz wszystko)
odoo accounting v14 pos v15
O tym forum
To pytanie dostało ostrzeżenie
2 Odpowiedzi
196 Widoki
Awatar
Speartech Solutions

I have downloaded and installed virtual IoT for Odoo 17 for my client. I can access the IoT dashboard using localhost:8069. But when I try to use the ip address. It’s unreachable. Also on the POS module end, it’s shows as IoT disconnected. 

Awatar
Odrzuć
Speartech Solutions
Autor

Hi Anni

I am unable to see the offline paring  

Codesphere Tech

Hello,
Is it on the same network?

Speartech Solutions
Autor

i can now access the virtual IoT box using Ip address:8069 and localhost:8069. However my PoS end still shows IoT disconnected.

Both are on the same network with the same ip address.

Awatar
Cybrosys Techno Solutions Pvt.Ltd
Najlepsza odpowiedź
Hi,

To troubleshoot the Virtual IoT Box connection issues in Odoo 17, first verify that the Virtual IoT Box process is running and check its logs for errors. Confirm the correct IP address and port of the Virtual IoT Box using ipconfig or ifconfig, and ensure your firewall allows incoming connections to that port.

In Odoo, update the "IoT Box URL" in the POS configuration with the correct IP address and port, and verify that the iot module is installed and up-to-date. Restart the Odoo server after making changes. If using a virtual machine, ensure the network adapter is in bridged mode. Clear your browser's cache and disable extensions to rule out browser-related issues. If problems persist, test the connection from another machine on the network.

Hope it helps

Awatar
Odrzuć
Awatar
anni
Najlepsza odpowiedź

To resolve this, install the IoT module inside Odoo first and then connected the Virtual IoT using the Offline Pairing option (available in Developer Mode).

After enabling Developer Mode:

  1. Go to IoT App → Configuration → Offline Pairing.

  2. Copy the offline token/code generated by Odoo.

  3. Open the Virtual IoT dashboard (localhost:8069).

  4. Paste the pairing code there.

  5. Pairing completes successfully, and the IoT becomes reachable by the POS.

Awatar
Odrzuć