Skip to Content
This question has been flagged
barcodescannerandroidAttendances
2 Respostes
3523 Vistes
Avatar
Hans Rickhoff 🚀 https://obd.digital

Hi,

im want to use an Android Tablet and a Barcode Scanner as an Attendance Device in Odoo15.

I bought a cheap Android Tablet "Lenovo M10" and a Barcode Scanner. Tera HW0002.


When im Scanning the Code in a Texteditor it works just fine and its writing the correct value. But whem im trying to scan the codes in a browser in the kiosk enviroment of the attendance app, i tried fully kiosk browser and chrome on android. The code is only read about 10% of the tries. The other time the system gives an error and breaks the code and adds "." between the numbers.

what i have tried:

Disabled all the autocorrect features of the Android Keyboard

Scanner Bluetooth Speed

Scanner Keyboard Language


In the screenshot you see the error and the splitted batch id. it should have scanner:  041643446027

https://snipboard.io/sOcxUW.jpg

Avatar
Descartar
Avatar
Hans Rickhoff 🚀 https://obd.digital
Autor Best Answer

ive tried lots of different smartphones and tablets i had laying around here...
best solution now and the only one that worked good is also the cheapest... Amazon Fire 7. Dont know exactly why, maybe older android version? But that is flawless now.

Odoo Beratung Deutschland

Avatar
Descartar
Avatar
Chris Mann
Best Answer

I think i've seen the same problem when testing on Android tablets previously using bluetooth barcode scanners.
The issue was actually the onscreen keyboard on the tablet that was interfering. I think you were on the right track with disabling the autocorrect features, but you also need to disable the entire onscreen keyboard from appearing for the barcode scanner device.
This might help.  CN51 Android How to prevent virtual keyboard from popping up (honeywellaidc.com)

Also you may need to further adjust the scanner speed after doing this as you mentioned above you had tried, but both of these were needed for me to get a reliable scanner input.

Avatar
Descartar
Hans Rickhoff 🚀 https://obd.digital
Autor

thanks for answering. ive tried that also. the onscreen keyboard "gboard" is not showing up when the code is scanned.
What i figured out is that the bluetooth transmission speed makes a difference of how the error look like. when im on "low speed mode" it makes a fullstop after 3 digets.
on "super high speed" its makes the break after around 8 digets.
so maybe a workaround is to shorten the codes. But thats not a great workaround...
is this a bug only on android? getting a cheap ipad would maybe solve that problem? i think im going to test that...

Chris Mann

It might also be worth looking at the manual for your barcode scanner and disabling any suffix characters or line breaks after the code. The issue is likely due to performance lag between the tablet and the scanner, but should be possible to overcome.
If you have access to another tablet to test it i'd advise trying that. I also tested with Ipads and those worked flawlessly.

Related Posts Respostes Vistes Activitat
bar code
barcodescanner
Avatar
0
de set. 24
1543
Modulo de asistencias
Attendances
Avatar
Avatar
1
de maig 24
1544
APP CODEBAR EAN-128 FROM ODOO V16
barcodescanner
Avatar
Avatar
1
de des. 23
2061
Break Management
Attendances
Avatar
Avatar
2
d’abr. 24
3380
Using the barcode app with products tracked by lot Solved
barcodescanner
Avatar
Avatar
Avatar
3
de juny 23
3855