v18: 2 step manufacturing route:picking & manufacture. Problem trigger picking ignored

Question

After setting the warehouse setting 3 steps manufacturing, I got addtional route and 2 pull & 1 push rules. Nice:)). the pull rule 1 picks components from stock and as destination pre-production. While the second pull rule (WO) has as source the pre-production location and the supply method "trigger another rule".
But when creating and executing the MO, the availabilty is orange and the pre-production location is empty. I do not get a transfer request from Odoo. The end of the MO the stock level

Cybrosys Techno Solutions Pvt.Ltd · Answer

Hi,
Please refer to the links:
1. https://www.odoo.com/documentation/18.0/applications/inventory_and_mrp/manufacturing/basic_setup/three_step_manufacturing.html [1]
2. https://www.youtube.com/watch?v=qqNEEBNtArA [2]
3. https://www.youtube.com/watch?v=3ZrpCqLjOIY [3]
4. https://www.cybrosys.com/slides/how-to-configure-manufacturing-in-3-steps-in-odoo-17 [4]

Hope it helps.

[1] https://www.odoo.com/documentation/18.0/applications/inventory_and_mrp/manufacturing/basic_setup/three_step_manufacturi

Jaideep · Answer

You might want to validate the source and destination location set on the Manufacturing operation.
Believe they need to be pre-production and post production.
From your post it seems the push rule didn’t trigger post MO production either

Armand Perduijn · Answer

Hi Rani, It persists :)). And thanks for the reminder of the inventory adjustments. There was indeed a MO trail not unbuild to restore the stock. But that didn't solve unfortuanally the triggering issue. But the most fuzzy thing I see on the smart button shopfloor is a Workcentre (for the MO) which is not on operation of the MO AND what is archived!!!

Powiązane posty	Odpowiedzi	Widoki
Master Production Scheduling in "Manufacturing module" manufacturing	1 lis 25	123
How to make Odoo schedule manufacturing in parallel? manufacturing	0 paź 25	509
Change in Work Center Productivity Accounting manufacturing	1 wrz 25	1322
How to disable form view if there are not registers? manufacturing	2 wrz 25	1002
Columna calculada en orden de producción manufacturing	2 wrz 25	864

To pytanie dostało ostrzeżenie

Podoba Ci się ta dyskusja? Dołącz do niej!