Skip to Content
Menu
Musisz się zarejestrować, aby móc wchodzić w interakcje z tą społecznością.
To pytanie dostało ostrzeżenie
1 Odpowiedz
10800 Widoki

Hi, 

I am kind of helpless. I downloaded the posbox image from here: https://nightly.odoo.com/trunk/posbox/

Then flashed my 30GB SD Card with the image. Worked so far. 

But how the hell can I install this OS on my raspberry pi? When I insert the SD card into the Raspi, nothing happens. No boot (what I would expect). 

How does that work? there is almost no documentation!

Awatar
Odrzuć
Najlepsza odpowiedź

Dear Dominic,

As per my Knowledge, All Released version of the POSBOX Images are based on the Older version of the Raspberian Wheezy Operating System which is not compatible with Raspberry Pi 3 as NO ARMv8 Kernel in Wheezy OS.

My Suggestion is to go with the Raspberry Pi B or B+ rather Pi 3....That will Sure Work.

Cheers ! :D

Awatar
Odrzuć
Powiązane posty Odpowiedzi Widoki Czynność
0
lis 16
3977
1
kwi 15
3784
4
mar 15
6580
0
mar 15
4509
2
gru 23
31568