Skip to Content
Menu
Musisz się zarejestrować, aby móc wchodzić w interakcje z tą społecznością.
To pytanie dostało ostrzeżenie
2 Odpowiedzi
370 Widoki

Hi everyone,

I'm working with Odoo 18, and I'm trying to improve how components are handled during manufacturing. I am in the 1 step process.

I want to define default storage locations for each component, so that when a Manufacturing Order (MO) is created, Odoo pulls components from their specific shelves — not from the generic WH/Stock location.

For example:

  • Product A is a finished product
  • It is built from Products B, C, and D
  • Product B is stored in Shelf B
  • Product C in Shelf C
  • Product D in Shelf D
  • After production, Product A should be stored in Shelf A

I’ve already set up Putaway Rules, so incoming products go to the right shelves when received. That part works fine.

But when I create a Manufacturing Order, all components are still pulled from WH/Stock by default.

I’d like to make it so that each component has a default source location (like Shelf B, Shelf C, etc.) that Odoo uses automatically during production.

Is there a standard way to do this in Odoo?

Awatar
Odrzuć
Najlepsza odpowiedź

A manufacturing can only have one location for components. 

The standard way for your need is to set up two step manufacturing. You will pick the components from different shelfs and bring to the manufacturing location.  This is also what you will do physical.  Somebody will go around and pick what you need. 

It is easy to set up: Just go into the warehouse setting and select two step manufacturing. Odoo will automatic create the routes and rules and the transfer type for picking you need and change the settings in the manufacturing order.

It is possible to set up picking by each manufacturing order or all in one picking order. 

Always do changes like this in a testbase first.

Awatar
Odrzuć
Autor Najlepsza odpowiedź

You are following the correct flow — to achieve the expected behavior, you just need to ensure that the specific shelf locations (e.g., Shelf B, C, D) are configured as sub-locations of WH/Stock.

Once this is set up properly, Odoo will recognize those shelves as valid source locations during the manufacturing process, and components will be pulled accordingly from their respective shelves.


Awatar
Odrzuć
Powiązane posty Odpowiedzi Widoki Czynność
3
cze 25
916
2
wrz 24
1229
1
maj 24
1798
0
maj 24
1373
0
maj 23
3912