IoT box¶
Untuk mulai menggunakan IoT box:
Hubungkan perangkat Anda ke IoT box.
Koneksi jaringan¶
IoT box dapat dihubungkan ke jaringan melalui Ethernet atau Wi-Fi.
Catatan
It is recommended to connect the IoT box to the same network as the devices it connects to.
Penting
Jangan pernah membuat IoT box dapat diakses dari Internet publik. Sistem IoT dirancang untuk memberikan akses database ke perangkat di jaringan lokal. Mengeksposnya ke Internet publik akan menciptakan risiko keamanan.
Ethernet¶
Colokkan kabel Ethernet ke port Ethernet IoT box dan port yang tersedia di router Anda, lalu hubungkan IoT box ke sumber daya.
Wi-Fi¶
Pastikan tidak ada kabel Ethernet yang terhubung ke IoT box dan ikuti langkah-langkah berikut:
Hubungkan IoT box ke sumber daya dan tunggu beberapa menit hingga menyala.
Access the computer's Wi-Fi settings and select the IoT box's network. The network name is in the format
IoTBox-xxxxxxxxxxxx(wherexxxxxxxxxxxxis a unique identifier).Connect to the IoT box's Wi-Fi network and sign in to it; the browser should automatically open and redirect to the IoT box's homepage.
Di halaman beranda IoT box, klik Configure di sebelah bagian Internet Status.
Tunggu beberapa menit hingga jaringan yang tersedia dipindai, pilih jaringan, masukkan kata sandi Wi-Fi, dan klik Connect.
Catatan
Setelah terhubung ke jaringan Wi-Fi, IoT box berhenti memancarkan sinyal Wi-Fi-nya, dan komputer seharusnya otomatis terhubung kembali ke jaringan aslinya. Jika tidak, hubungkan kembali secara manual.
Depending on the operating system used, the browser might not open and redirect to the IoT box's homepage. In this case, open the browser manually and navigate to
http://10.11.12.1or any URL starting with http (e.g.,http://odoo.com).
Tip
If the IoT box is connected to an external monitor, scan the first QR code displayed on the screen to connect to the network, then scan the second QR code to access the IoT box's homepage. On the homepage, click Configure in the Internet Status section, select the relevant Wi-Fi network, enter the password, and click Connect.
Status LED¶
The IoT box features two LEDs, located to the right of the SD card slot, that indicate its status and help with troubleshooting when no display is connected. The LEDs can be interpreted as follows:
Red LED lit: The IoT box is not connected to the Internet. Ensure the Ethernet cable is properly connected, or connect the IoT box via Wi-Fi.
Green LED flashing: The IoT box is waiting to connect to a database.
LED hijau menyala terus-menerus: IoT box terhubung ke database; tidak diperlukan tindakan lebih lanjut.
Halaman beranda IoT box¶
To access the IoT box's homepage on a device, first ensure the device is on the same network as the IoT box. Then, if using the IoT app, click Homepage, or open a browser on the device and navigate to the IoT box's IP address.
If the IP address is not already known, use any of the following methods to retrieve it:
While connected to the same network as the IoT box, open a web browser and navigate to
http://iotbox.local. The page automatically redirects to the homepage, which displays the IP address.Connect a supported receipt or label printer using a USB cable, which then automatically prints a ticket with the IP address.
Connect the IoT box to an external monitor, which then displays the IP address on the screen.
On IoT box images
L2026.05.25and later, the IoT box IP address is displayed as a discovered Bluetooth device for 5 minutes after booting.Access the router's administrator interface, or use third-party software to scan the network.
Tip
To manually restart the IoT box, access the homepage, then click the (power off) button in the top-right corner.
Jika IoT box terhubung ke monitor eksternal atau printer, homepagenya juga dapat diakses dengan memindai kode QR yang ditampilkan atau dicetak dengan perangkat yang terhubung ke jaringan yang sama dengan IoT box.
To fully reboot the IoT box, unplug it and plug it back in.