I am trying to connect the scale to odoo11 with posbox but without raspberry pi. The whole system is on a ubuntu 18.04.

It does not give me errors when debugging but it does not find the device either and in the system there is no path "/ dev / serial / by-path /"

The scale is connected by rs232, in the ttyS0 system.

I have only touched the scale class and in the Hw_proxy "drivers" and "rs232_devices" as I show below.

Any solution?

Thanks a lot!

Hw_scale:

class Scale(Thread):

    def __init__(self):

        Thread.__init__(self)

        self.lock = Lock()

        self.scalelock = Lock()

        self.status = {'status':'connecting', 'messages':[]}

        self.input_dir = '/dev/serial/by-path/'      #The directory does not exist in my ubuntu

        self.weight = 0

        self.weight_info = 'ok'

        self.device = '/devices/pnp0/00:05/tty/ttyS0'

        self.path_to_scale = '/dev/ttyS0'

        self.protocol = 'ADAMEquipmentProtocol'

Hw_proxy:

drivers = {'scale': '16550A'} 

rs232_devices = {'/devices/pnp0/00:05/tty/ttyS0':'16550A'}  # {'/path/to/device': 'driver'}

rs232_lock = Lock()   # must be held to update `rs232_devices