Cannot setup IP Address for Ethernet on my PoSBox

Question

I have install POSBox v15 on a Raspberry Pi and I'm trying to connect to it via *ethernet*.
While DHCP should assign an IP address on 192.168.0.X, 192.168.1.X or 10.0.0.X address range, my LAN is on 192.168.50.X range. So as the setup guide says (https://www.odoo.com/documentation/user/10.0//point_of_sale/overview/setup.html#troubleshoot),
I should manually setup the ip address of my POSBox.
But what the guide doesn't say is *how to manually setup an IP Address for the POSBox*...
So far I haven'

Herbert Riener · Accepted Answer

Hey,
since the posbox reads the config to the ram you need to edit the proper folder.
Enclosed are the steps for configuring  a static IP:

$>*sudo  mount -o remount,rw /root_bypass_ramdisks*  *
*  File /root_bypass_ramdisks/etc/ dhcpcd.conf :add your config to the end of the file
interface eth0
static ip_address=10.0.1.60/24
static routers=10.0.1.1   static domain_name_servers=8.8.8.8 8.8.4.4

Robert Bui · Answer

From experience, you don't have to setup as noted with the IP addresses in the range 192.168.0.X, 192.168.1.X, 10.0.0.X. My network address is 192.168.3.0/24. My POSBox has not issue accessing from the POS.  When POSBox completed startup, it should print a "welcome message" to the printer specifying the IP address.
Base on the original post, am I correct to say you have try to setup */etc/dhcpcd.conf* on the POSBOX? If so, I don't think you need to do this. You don't need to touch network config

Gerelateerde posts	Antwoorden	Weergaven
How create a posbox image on a Ubuntu SSH? ubuntuserver posbox Posbox	0 sep. 19	4510
POSBOX to print receipt in other languages posbox	3 dec. 22	2341
IotBOX 19 and Ariva-B d5 + Magellan 9400i Tandem Opgelost Posbox	1 sep. 21	3662
How can I connect datalogic magellan 8400 scale and scanner to odoo pos box? Posbox	3 jun. 20	8716
Change POSBox pi password posbox	1 apr. 20	7601

Deze vraag is gerapporteerd

Geniet je van het gesprek? Blijf niet alleen lezen, doe ook mee!