도움말

2

What is the full list of command line options for Odoo?

Avatar
Ray Carnes

When you run the Odoo server, what command line options can you specify?

1코멘트
아바타
작성 취소
Avatar
Ahad Pashaeeian
-

very good

1응답
12
Avatar
Ray Carnes
최고의 답변

You can find this information out by running the following command line option:

--help

 

The full list of options (that are shown when using the --help option):

 

Options:

  --version             show program's version number and exit
  -h, --help            show this help message and exit

  Common options:
    -c CONFIG, --config=CONFIG
                        specify alternate config file
    -s, --save          save configuration to ~/.openerp_serverrc
    -i INIT, --init=INIT
                        install one or more modules (comma-separated list, use
                        "all" for all modules), requires -d
    -u UPDATE, --update=UPDATE
                        update one or more modules (comma-separated list, use
                        "all" for all modules). Requires -d.
    --without-demo=WITHOUT_DEMO
                        disable loading demo data for modules to be installed
                        (comma-separated, use "all" for all modules). Requires
                        -d and -i. Default is none
    -P IMPORT_PARTIAL, --import-partial=IMPORT_PARTIAL
                        Use this for big data importation, if it crashes you
                        will be able to continue at the current state. Provide
                        a filename to store intermediate importation states.
    --pidfile=PIDFILE   file where the server pid will be stored
    --addons-path=ADDONS_PATH
                        specify additional addons paths (separated by commas).
    --load=SERVER_WIDE_MODULES
                        Comma-separated list of server-wide modules
                        default=web

  XML-RPC Configuration:
    --xmlrpc-interface=XMLRPC_INTERFACE
                        Specify the TCP IP address for the XML-RPC protocol.
                        The empty string binds to all interfaces.
    --xmlrpc-port=XMLRPC_PORT
                        specify the TCP port for the XML-RPC protocol
    --no-xmlrpc         disable the XML-RPC protocol
    --proxy-mode        Enable correct behavior when behind a reverse proxy

  XML-RPC Secure Configuration:
    --xmlrpcs-interface=XMLRPCS_INTERFACE
                        Specify the TCP IP address for the XML-RPC Secure
                        protocol. The empty string binds to all interfaces.
    --xmlrpcs-port=XMLRPCS_PORT
                        specify the TCP port for the XML-RPC Secure protocol
    --no-xmlrpcs        disable the XML-RPC Secure protocol
    --cert-file=SECURE_CERT_FILE
                        specify the certificate file for the SSL connection
    --pkey-file=SECURE_PKEY_FILE
                        specify the private key file for the SSL connection

  NET-RPC Configuration:
    --netrpc-interface=NETRPC_INTERFACE
                        specify the TCP IP address for the NETRPC protocol
    --netrpc-port=NETRPC_PORT
                        specify the TCP port for the NETRPC protocol
    --no-netrpc         disable the NETRPC protocol
    --netrpc            enable the NETRPC protocol

  Web interface Configuration:
    --db-filter=REGEXP  Filter listed database

  Static HTTP service:
    --static-http-enable
                        enable static HTTP service for serving plain HTML
                        files
    --static-http-document-root=STATIC_HTTP_DOCUMENT_ROOT
                        specify the directory containing your static HTML
                        files (e.g '/var/www/')
    --static-http-url-prefix=STATIC_HTTP_URL_PREFIX
                        specify the URL root prefix where you want web
                        browsers to access your static HTML files (e.g '/')

  Testing Configuration:
    --test-file=TEST_FILE
                        Launch a YML test file.
    --test-report-directory=TEST_REPORT_DIRECTORY
                        If set, will save sample of all reports in this
                        directory.
    --test-enable       Enable YAML and unit tests.
    --test-commit       Commit database changes performed by YAML or XML
                        tests.

  Logging Configuration:
    --logfile=LOGFILE   file where the server log will be stored
    --no-logrotate      do not rotate the logfile
    --syslog            Send the log to the syslog server
    --log-handler=PREFIX:LEVEL
                        setup a handler at LEVEL for a given PREFIX. An empty
                        PREFIX indicates the root logger. This option can be
                        repeated. Example: "openerp.orm:DEBUG" or
                        "werkzeug:CRITICAL" (default: ":INFO")
    --log-request       shortcut for --log-
                        handler=openerp.netsvc.rpc.request:DEBUG
    --log-response      shortcut for --log-
                        handler=openerp.netsvc.rpc.response:DEBUG
    --log-web           shortcut for --log-
                        handler=openerp.addons.web.http:DEBUG
    --log-sql           shortcut for --log-handler=openerp.sql_db:DEBUG
    --log-level=LOG_LEVEL
                        specify the level of the logging. Accepted values:
                        ['info', 'debug_rpc', 'warn', 'test', 'critical',
                        'debug_sql', 'error', 'debug', 'debug_rpc_answer',
                        'notset'] (deprecated option).

  SMTP Configuration:
    --email-from=EMAIL_FROM
                        specify the SMTP email address for sending email
    --smtp=SMTP_SERVER  specify the SMTP server for sending email
    --smtp-port=SMTP_PORT
                        specify the SMTP port
    --smtp-ssl          if passed, SMTP connections will be encrypted with SSL
                        (STARTTLS)
    --smtp-user=SMTP_USER
                        specify the SMTP username for sending email
    --smtp-password=SMTP_PASSWORD
                        specify the SMTP password for sending email

  Database related options:
    -d DB_NAME, --database=DB_NAME
                        specify the database name
    -r DB_USER, --db_user=DB_USER
                        specify the database user name
    -w DB_PASSWORD, --db_password=DB_PASSWORD
                        specify the database password
    --pg_path=PG_PATH   specify the pg executable path
    --db_host=DB_HOST   specify the database host
    --db_port=DB_PORT   specify the database port
    --db_maxconn=DB_MAXCONN
                        specify the the maximum number of physical connections
                        to posgresql
    --db-template=DB_TEMPLATE
                        specify a custom database template to create a new
                        database

  Internationalisation options:
    Use these options to translate OpenERP to another language.See i18n
    section of the user manual. Option '-d' is mandatory.Option '-l' is
    mandatory in case of importation

    --load-language=LOAD_LANGUAGE
                        specifies the languages for the translations you want
                        to be loaded
    -l LANGUAGE, --language=LANGUAGE
                        specify the language of the translation file. Use it
                        with --i18n-export or --i18n-import
    --i18n-export=TRANSLATE_OUT
                        export all sentences to be translated to a CSV file, a
                        PO file or a TGZ archive and exit
    --i18n-import=TRANSLATE_IN
                        import a CSV or a PO file with translations and exit.
                        The '-l' option is required.
    --i18n-overwrite    overwrites existing translation terms on updating a
                        module or importing a CSV or a PO file.
    --modules=TRANSLATE_MODULES
                        specify modules to export. Use in combination with
                        --i18n-export

  Security-related options:
    --no-database-list  disable the ability to return the list of databases

  Advanced options:
    --debug             enable debug mode
    --stop-after-init   stop the server after its initialization
    -t TIMEZONE, --timezone=TIMEZONE
                        specify reference timezone for the server (e.g.
                        Europe/Brussels
    --osv-memory-count-limit=OSV_MEMORY_COUNT_LIMIT
                        Force a limit on the maximum number of records kept in
                        the virtual osv_memory tables. The default is False,
                        which means no count-based limit.
    --osv-memory-age-limit=OSV_MEMORY_AGE_LIMIT
                        Force a limit on the maximum age of records kept in
                        the virtual osv_memory tables. This is a decimal value
                        expressed in hours, and the default is 1 hour.
    --max-cron-threads=MAX_CRON_THREADS
                        Maximum number of threads processing concurrently cron
                        jobs (default 2).
    --unaccent          Use the unaccent function provided by the database
                        when available.

  Multiprocessing options:
    --workers=WORKERS   Specify the number of workers, 0 disable prefork mode.
    --limit-memory-soft=LIMIT_MEMORY_SOFT
                        Maximum allowed virtual memory per worker, when
                        reached the worker be reset after the current request
                        (default 671088640 aka 640MB).
    --limit-memory-hard=LIMIT_MEMORY_HARD
                        Maximum allowed virtual memory per worker, when
                        reached, any memory allocation will fail (default
                        805306368 aka 768MB).
    --limit-time-cpu=LIMIT_TIME_CPU
                        Maximum allowed CPU time per request (default 60).
    --limit-time-real=LIMIT_TIME_REAL
                        Maximum allowed Real time per request (default 120).
    --limit-request=LIMIT_REQUEST
                        Maximum number of request to be processed per worker
                        (default 8192).

2의견
아바타
작성 취소
Avatar
Andre de Kock
-

Worth mentioning that Odoo will open `db_maxconn * workers` connections to the database, so make sure you keep that in mind when tuning PostgreSQL

Avatar
James White
-

Hey Ray, I notice that data_dir is not in the --help output. I learned that while trying to figure out how to move my /filestore. Do you think it's just new options in a newer version, or are there "hidden" options for odoo.conf - and where might one find them?