Community mailing list archives
Re: Seeking: Push/Pull Rules in v9/v10 equivalent to 'picking before manufacturing'by
Hi Jeffrey,When a manufacturing order is confirmed, it creates stock moves. If the product is NOT make to order, that will not create procurements, but just stock moves that will be awaiting availability on the Manufacture location. Unless you have orderpoints defined in this mfg location that are able to detect the demand and trigger procurements, you'll never get the pull rules evaluated, because the pull rules are evaluated from procurements.I tried to play with the module stock_mts_mto_rule (https://github.com/OCA/stock-
logistics-warehouse/tree/8.0/) to try to make it work for manufacturing orders, so that the application would check for stock in the manufacture location first, and would create a procurement for the quantity not found, but did not succeed. stock_mts_mto_ruleRegards,Jordi.On Wed, Nov 23, 2016 at 1:16 PM, Jeffery <firstname.lastname@example.org> wrote:the simple case is to setup a dedicated warehouse for manufacturing, and then setup the pull flow from main WH to MRP.On Tue, Nov 22, 2016 at 3:57 PM, Jordi Ballester Alomar <email@example.com> wrote:Hi Ray,In v9 You have to enter a location in the routing associated to the BOM. Once you do, at the time of confirming the MO new stock moves will be created from the MO's raw materials location to the routing's location. These moves are chained to the manufacturing's moves.In v10 this feature has been dropped. You can still enter a routing's location, but that will just substitute the raw materials location of the MO.I'm afraid that you'll then have to create orderpoint rules at the routing's location in make to stock products in order to force an internal picking to be created from the backstock location to the routing's location.Regards,Jordi.--On Mon, Nov 21, 2016 at 11:07 PM, <firstname.lastname@example.org >wrote:
I understand that the v7 Odoo capability ‘picking before manufacturing’ module is no longer available because push or pull rules can now be setup on the routing.
These rules create a manual picking step where an Internal Transfer has to be validated before the Manufacturing Order can consume the inputs.
Does anyone have an example screenshot or other description of how this would be done now at v9 or v10.
Senior Odoo Consultant
Greater Los Angeles
--Jeffery -odoo expert form kunshan, suzhou, chinaIM Q913547235--