Community mailing list archives

community@mail.odoo.com

Re: POSBox Error

by
AD LIBITOM, michel Guénard
- 07/13/2015 07:57:51
in my opinion, the absence of printing for the posbox status means the posbox is not connected to the POS apps.

can you describe the details of the hardware components (posbox, routeur, pc etc...); the posbox must be connected to the same network as POS apps.

Le 13/07/2015 13:42, aasim ansari a écrit :
<blockquote cite="mid:CAGsrLPi=r6EmSGDNybjHkpGv3KrQepDTvH-3bTLAGa2D7DgOCw@mail.gmail.com" type="cite">
Also, the manual says "Once the PosBox is ready, it should print a status receipt
with its IP Address. Also, the last status led, just after the red power status led, should be permanently lit green.". When I power ON my POSBox no status receipt prints.

Please help me if I have missed anything.

Thanks.



--

Aasim Ahmed Ansari

Cell: +91 9619 424 386


On Mon, Jul 13, 2015 at 4:56 PM, aasim ansari <aasim333@gmail.com> wrote:
OK my SD Card is 8GB and I flash it with the latest version. 

Now, I connected my printer and scanner to my POSBox and the status page shows all is successfully connected. See attachment.

My printer is Epson TM-T82II and I added  { 'vendor' : 0x04b8, 'product' : 0x0201, 'name' : 'Seiko Epson Corp.' }, in odoo/addons/hw_escpos/escpos/supported_devices.py file on POSBox.

Even in Point of Sale everything shows connected. But neither the scanner nor printer works.

When I hit Validate this is what I get in POSBox logs but nothing prints-
Jul 13 11:09:03 posbox openerp-server[573]: print_b64_img
Jul 13 11:09:03 posbox openerp-server[573]: raw image

Please tell me what I missed.



--

Aasim Ahmed Ansari

Cell: +91 9619 424 386


On Wed, Jul 8, 2015 at 10:09 PM, Ronald Wopereis <woepwoep@gmail.com> wrote:

I had no problems using apt-get update; apt-get upgrade (which gets the nightly odoo version) and apt-get autoremove.

A git pull may be too much, especially when depth larger than one.

Hope this helps
R

Op 8 jul. 2015 16:49 schreef "Adlibitom" <ad.libitom@laposte.net>:

Hello
The posbox software installed on the SD card is a linux distribution.
The root directory is probably not large enough for 2 system. (same kind of message for any other pc with linux distribution)
The issue can be solved by deleting the release which will be replaced by the new one.
my 2 cents

Le 08/07/2015 15:49, Martin Trigaux a écrit :
<blockquote cite="mid:559D2876.8060208@odoo.com" type="cite">
So it's a micro sd card, it's present on the back of the board
http://cdn2.alphr.com/sites/alphr/files/6/21/raspberry_pi_b_6_0_0.jpg


On 08/07/15 15:25, aasim ansari wrote:
> I bought POSBox from Odoo itself. The model is Rasberry Pi 2 Model B
> V1.1. Let me re-check the space and get back to you.
> 
> Anyways I would like to know how to flash SD Card since I don't see any
> on the POSBox.
> 

-- 
Martin Trigaux
Odoo (Formerly OpenERP)
https://odoo.com
https://github.com/mart-e

_______________________________________________
Mailing-List: https://www.odoo.com/groups/community-59
Post to: mailto:community@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribe


--
Michel Guénard, Associé Nouvelle adresse pour les livraisons La boutique du conservatoire/Ad Libitom 38 rue du Vieux Versailles 78000 - VERSAILLES FRANCE

_______________________________________________
Mailing-List: https://www.odoo.com/groups/community-59
Post to: mailto:community@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribe

_______________________________________________
Mailing-List: https://www.odoo.com/groups/community-59
Post to: mailto:community@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribe



_______________________________________________
Mailing-List: https://www.odoo.com/groups/community-59
Post to: mailto:community@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribe