Community mailing list archives

community@mail.odoo.com

posbox reports printer and scanner offline

by
Ronald Wopereis
- 06/14/2015 11:06:15
hi all,

i have a standard Odoo posbox configuration,
with Epson printer, cashdrawer, scanner and pi.

logging in on the pi, it says
pi@posbox ~ $ lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. 
Bus 001 Device 004: ID 0c2e:0200 Metro Metrologic Scanner
Bus 001 Device 005: ID 04b8:0e15 Seiko Epson Corp. 

device 004 is the scanner, device 005 is the printer.
all fine, it seems.


also...

Your PosBox is up and running

The PosBox is an hardware adapter that allows you to use receipt printers and barcode scanners with Odoo's Point of Sale, version 8.0 or later. You can start an online free trial, or download and install it yourself.

For more information on how to setup the Point of Sale with the PosBox, please refer to the manual

To see the status of the connected hardware, please refer to thehardware status page

The PosBox software installed on this posbox is version 11, the posbox version number is independent from Odoo. You can upgrade the software on the upgrade page

For any other question, please contact the Odoo support atsupport@odoo.com


also...

Configuration:
Hardware Proxy

i have Print via Proxy enabled, Scan via Proxy enabled, Cashdrawer enabled. (perhaps not visible but the options are checked)



the problem is, in the POS, both scanner and printer are reported "offline".

what could be the problem here?
thx, Ron