- Mailing Lists
- Announcements
- Re: New version of the posbox image
Archives
Announcements
announcements@mail.odoo.com
Re: New version of the posbox image
On 16/07/18 06:52, Philippe Thuaud wrote: > > Thank you. Is this for Odoo v11 or can it also works for Odoo10. I am > asking since you mentioned that you change the python version so just > want to make sure. > The posbox software used to run on a version 8.0 of Odoo. This new version indeed runs on a 11.0 version of Odoo. However, it does not matter for the user. You can use this version of the posbox to communicate with a point of sale in version 9, 10 or 11 (or even 7 and 8.0), no problem. The only exception is the support for customer facing display (added in the previous version of the posbox). This feature is only available for users of Odoo 11.0. Martin -- Martin Trigaux Odoo https://odoo.com https://github.com/mart-e
by Martin Trigaux (mat) - 03:44 - 16 Jul 2018
Reference
-
New version of the posbox image
Dear point of sale users,
We have published a new version of the image of the PosBox for the point of sale module.
While this change should have no visible effect on the user, the change is important on the technical side (long story short: running on python 3 instead of python 2).
Before shipping this upgrade to production, we have published the new version (now 17) in beta and we would love if some of you could flash it on a raspberry pi and test it on a point of sale.
You can find the new image in the following file
https://nightly.odoo.com/trunk/posbox/posbox_image_v17_beta.zip (730MB)
and flash the micro sd card with a tool like etcher.
Thank you a lot and please get in touch with me for your feedback.
Martin
-- Martin Trigaux Odoo https://odoo.com https://github.com/mart-e
by Martin Trigaux (mat) - 11:52 - 13 Jul 2018-
RE: New version of the posbox image
Thank you Martin
Well noted.
From: Martin Trigaux [mailto:mat@odoo.com]
Sent: Monday, July 16, 2018 2:45 PM
To: Announcements <announcements@mail.odoo.com>
Subject: Re: New version of the posbox imagePhilippe Thuaud
Project Manager, SafeComs
t: +66 2 105 4520
e: Philippe.Thuaud@safecoms.com
a: P.S. Tower 11fl. Sukhumvit 21, Bangkok
w: www.safecoms.co.thERP - IT Outsourcing - Security - IT Projects Management
>
> Thank you. Is this for Odoo v11 or can it also works for Odoo10. I am
> asking since you mentioned that you change the python version so just
> want to make sure.
>
The posbox software used to run on a version 8.0 of Odoo. This new
version indeed runs on a 11.0 version of Odoo.
However, it does not matter for the user. You can use this version of
the posbox to communicate with a point of sale in version 9, 10 or 11
(or even 7 and 8.0), no problem.
The only exception is the support for customer facing display (added in
the previous version of the posbox). This feature is only available for
users of Odoo 11.0.
Martin
--
Martin Trigaux
Odoo
https://odoo.com
https://github.com/mart-e
_______________________________________________
Mailing-List: https://www.odoo.com/groups/announcements-528918
Post to: mailto:announcements@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribe
by Philippe Thuaud - 04:26 - 16 Jul 2018 -
Re: New version of the posbox image
On 16/07/18 06:52, Philippe Thuaud wrote: > > Thank you. Is this for Odoo v11 or can it also works for Odoo10. I am > asking since you mentioned that you change the python version so just > want to make sure. > The posbox software used to run on a version 8.0 of Odoo. This new version indeed runs on a 11.0 version of Odoo. However, it does not matter for the user. You can use this version of the posbox to communicate with a point of sale in version 9, 10 or 11 (or even 7 and 8.0), no problem. The only exception is the support for customer facing display (added in the previous version of the posbox). This feature is only available for users of Odoo 11.0. Martin -- Martin Trigaux Odoo https://odoo.com https://github.com/mart-e
by Martin Trigaux (mat) - 03:44 - 16 Jul 2018 -
RE: New version of the posbox image
Hi Martin,
Thank you. Is this for Odoo v11 or can it also works for Odoo10. I am asking since you mentioned that you change the python version so just want to make sure.
Best regards,
From: Martin Trigaux [mailto:mat@odoo.com]
Sent: Friday, July 13, 2018 10:53 PM
To: Announcements <announcements@mail.odoo.com>
Subject: New version of the posbox imageDear point of sale users,
We have published a new version of the image of the PosBox for the point of sale module.
While this change should have no visible effect on the user, the change is important on the technical side (long story short: running on python 3 instead of python 2).
Before shipping this upgrade to production, we have published the new version (now 17) in beta and we would love if some of you could flash it on a raspberry pi and test it on a point of sale.
You can find the new image in the following file
https://nightly.odoo.com/trunk/posbox/posbox_image_v17_beta.zip (730MB)
and flash the micro sd card with a tool like etcher.
Thank you a lot and please get in touch with me for your feedback.
Martin--
Martin Trigaux
Odoo
https://odoo.com
https://github.com/mart-e
_______________________________________________
Mailing-List: https://www.odoo.com/groups/announcements-528918
Post to: mailto:announcements@mail.odoo.com
Unsubscribe: https://www.odoo.com/groups?unsubscribePhilippe Thuaud
Project Manager, SafeComs
t: +66 2 105 4520
e: Philippe.Thuaud@safecoms.com
a: P.S. Tower 11fl. Sukhumvit 21, Bangkok
w: www.safecoms.co.thERP - IT Outsourcing - Security - IT Projects Management
by Philippe Thuaud - 12:51 - 16 Jul 2018
-